相关论文: Delaying transition induced by a strip of distribu…
Direct numerical simulations of a low-pressure turbine with roughness elements distributed over the blade surface have been performed. A series of fifteen cases with varying roughness heights and streamwise wavenumbers are introduced to…
The influence of roughness spacing on boundary layer transition over distributed roughness elements is studied using direct numerical simulation (DNS) and global stability analysis, and compared to isolated roughness elements at the same…
The influence of surface roughness on transition to turbulence in a Mach 4.5 boundary layer is studied using direct numerical simulations. Transition is initiated by the nonlinearly most dangerous inflow disturbance, which causes the…
Boundary layer transition triggered by a discrete roughness element generates a turbulent wedge that spreads laterally as it proceeds downstream. Historical literature reports the spreading half angle is approximately 6$^{\circ}$ in…
Experiments have shown that micron-sized distributed surface roughness can significantly promote transition in a three-dimensional boundary layer dominated by crossflow insta- bility. This sensitive effect has not yet been fully explained…
Turbulent flow over a surface with streamwise-elongated rough and smooth stripes is studied by means of direct numerical simulation (DNS) in a periodic plane open channel with fully resolved roughness. The goal is to understand how the mean…
Direct numerical simulations are conducted to study the receptivity and transition mechanisms in a solitary wave boundary layer developing over randomly organized wave-like bottom topography. The boundary layer flow shows a selective…
Surface roughness significantly impacts transition to turbulence, especially over high-speed, blunt geometries where surface ablation is necessary to mitigate heat loads during atmospheric entry. Inspired by sand-grain roughness experiments…
The stability and transition in the bottom boundary layer under a solitary wave are analysed in the presence of finite amplitude disturbances. First, the receptivity of the boundary layer is investigated using a linear input-output…
Prandtl's secondary flows of the second kind generated by laterally-varying roughness are studied using the linearised Reynolds-Averaged Navier-Stokes approach proposed in Zampino et al (2022). The momentum equations are coupled to the…
The attachment-line boundary layer is critical in hypersonic flows because of its significant impact on heat transfer and aerodynamic performance. In this study, high-fidelity numerical simulations are conducted to analyze the subcritical…
This study presents an experimental dataset documenting the evolution of a turbulent boundary layer downstream of a rough-to-smooth surface transition. To investigate the effect of upstream flow conditions, two groups of experiments are…
Knowledge of turbulent flows over non-flat surfaces is of major practical interest in diverse applications. Significant work continues to be reported in the roughness regime at high Reynolds numbers where the cumulative effect of surface…
In this paper, we analyze a shared access network with a fixed primary node and randomly distributed secondary nodes whose distribution follows a Poisson point process (PPP). The secondaries use a random access protocol allowing them to…
Three different porous substrates (with different pore sizes, s, and permeabilities, K) are used to examine their effect on the structure of boundary layer flow over them. The flow is characterised with single-point hot-wire measurements as…
A bypass transition scenario in a wind-stress driven aqueous flow is analysed using a temporally developing boundary layer model with accelerating surface drift velocity. The parameters of the model are selected to mimic a wave-tank…
Surface roughness elements are commonly used in wind tunnel testing to hasten the laminar-turbulent transition of the boundary layer in model tests to mimic the aerodynamic effects present in the full-scale application. These devices can…
Highly turbulent Taylor-Couette flow with spanwise-varying roughness is investigated experimentally and numerically (direct numerical simulations (DNS) with an immersed boundary method (IBM)) to determine the effects of the spacing and…
Turbulent mixed convection in channel flows with heterogeneous surfaces is studied using direct numerical simulations. The relative importance between buoyancy and shear effects, characterized by the bulk Richardson number $Ri_b$, is varied…
Previous experimental and numerical studies showed that two-dimensional roughness elements can stabilize disturbances inside a hypersonic boundary layer, and eventually delay the transition onset. The objective of this paper is to evaluate…