相关论文: Compact, Portable, Thermal-Noise-Limited Optical C…
The development of an optical clock with ultimate accuracy and stability requires lasers with very narrow linewidth. We present two ultrastable laser systems based on 48 cm long Fabry-Perot cavities made of ULE glass in horizontal and…
The next-generation sensing and communication applications rely on high-frequency microwave generation with low-noise. The microwave photonic technology is promising by the practical application is limited by its complex architecture so…
We describe a cryogenic cavity-optomechanical system that combines Si3N4 membranes with a mechanically-rigid Fabry-Perot cavity. The extremely high quality-factor frequency products of the membranes allow us to cool a MHz mechanical mode to…
Light in the mode of a Fabry-P\'erot cavity heats the mirror surfaces via optical absorption, causing thermoelastic deformation of the mirror substrates, which in turn dictates the shape of the mode. We develop an analytical model which…
We report on the fabrication and characterization of a Fabry-Perot microcavity enclosing a thin diamond membrane at cryogenic temperatures. The cavity is designed to enhance resonant emission of single nitrogen-vacancy centers by allowing…
We experimentally show an electro-optic tunable Fabry-Perot cavity on thin-film lithium niobate (TFLN). Instead of tuning the cavity phase and thus resonant frequency, we demonstrate modulation of the FP cavity by tuning the cavity mirrors…
The superb precision of an atomic clock is derived from its stability. Atomic clocks based on optical (rather than microwave) frequencies are attractive because of their potential for high stability, which scales with operational frequency.…
Magneto-optical traps (MOTs) are widely used for laser cooling of atoms. We have developed a high-flux compact cold-atom source based on a pyramid MOT with a unique adjustable aperture that is highly suitable for portable quantum technology…
Next-generation communications, radar and navigation systems will extend and exploit the higher bandwidth of the millimeter-wave domain for increased communication data rates as well as radar with higher sensitivity and increased spatial…
Interferometric detection of mirror displacements is intrinsically limited by laser shot noise. In practice, however, it is often limited by thermal noise. Here we report on an experiment performed at the liquid helium temperature to…
We successfully stabilized a Fabry-P\'erot optical cavity incorporating a bulk diamond crystal at millikelvin temperatures in a cryogen-free dilution refrigerator with the pulse-tube cryocooler running. In stark contrast to previous…
The sensitivity of high-precision interferometric measurements can be limited by Brownian noise within dielectric mirror coatings. This occurs, for instance, in the optical resonators of gravitational wave detectors where the noise can be…
We report on the relative length fluctuation of two fixed-spacer Fabry-Perot cavities with mirrors fabricated from silica/tantala dielectric coatings on fused silica substrates. By locking a laser to each cavity and reading out the beat…
We present the design of a compact optical clock based on the $^2S_{1/2} \rightarrow ^2D_{3/2}$ 435.5 nm transition in $^{171}$Yb$^+$. The ion trap will be based on a micro-fabricated circuit, with surface electrodes generating a trapping…
Factors that contribute to the temperature dependence of a resonant frequency in a low-expansion optical cavity are discussed, including deformation at the cavity ends due to different coefficients of thermal expansion (CTE) of the spacer,…
An optical lattice with rubidium atoms ($^{85}Rb$) is formed inside a ring resonator with a finesse of $1.8 \times 10^5$ and a large mode volume of 1.3 $mm^3$. We typically trap several times $10^6$ atoms at densities up to $10^{12}…
We have stabilized an external cavity diode laser to a whispering gallery mode resonator formed by a protrusion of a single-crystal magnesiumdifluoride cylinder. The cylinder's compact dimensions (<1 cm^3) reduce the sensitivity to…
Experiments were performed with Fabry-Perot optical resonators in vacuum at low temperatures. Mirrors were applied on substrates of various optical materials. The infrared laser with a wavelength of 1.064 microns was used. The pump power at…
Extra-laboratory atomic clocks are necessary for a wide array of applications (e.g. satellite-based navigation and communication). Building upon existing vapor cell and laser technologies, we describe an optical atomic clock, designed…
We demonstrate the fabrication of ultra-low-loss, all-fiber Fabry-P\'erot cavities containing a nanofiber section, optimized for cavity quantum electrodynamics. By continuously monitoring the finesse and fiber radius during fabrication of a…