相关论文: Design of a plasma chamber for a high-density 10 k…

In the quasi-gasdynamic high-current ion source described in this work, the plasma is sustained by high-power millimeter-wave radiation under the electron cyclotron resonance (ECR) condition. In such facilities, it is possible to achieve…

A large diameter plasma over 300 mm in diameter is produced by electron cyclotron resonance (ECR) discharges using a newly developed large diameter chamber of 400 mm in inner diameter. It is found that the electron temperature decreases as…

The Electron Cyclotron Resonance Ion Source (ECRIS) is nowadays the most effective device that can feed particle accelerators in a continuous and reliable way, providing high-current beams of low- and medium-charge-state ions and relatively…

We report experimental results of vacuum ultraviolet (VUV) emission from the plasma of an electron cyclotron resonance (ECR) discharge in hydrogen, sustained by powerful millimeter-wavelength radiation of a gyrotron. Distinctive features of…

This thesis is about the designing and constructing a microwave ion source. The ions are generated in a thermal and dense hydrogen plasma by microwave induction. The plasma is generated by using a microwave source with a frequency of 2.45…

The ion production in an ECRIS is modelled using a particle-in-cell Monte-Carlo collision code in a three-dimensional geometry. Only the heavy particles (ions and atoms) are tracked, with the electron density determined from the requirement…

Radio Frequency (RF) driven helicon plasma sources are commonly used for their ability to produce high-density argon plasmas (n > 10^19/m^3) at relatively moderate powers (typical RF power < 2 kW). Typical electron temperatures are < 10 eV…

Radio-frequency (RF) driven helicon plasma sources can produce relatively high-density plasmas (n > 10^19 m-3) at relatively moderate powers (< 2 kW) in argon. However, to produce similar high-density plasmas for fusion relevant gases such…

Negative hydrogen ion sources are used as injectors into accelerators and drive the neutral beam heating in ITER. Certain processes in low-temperature hydrogen plasmas are accompanied by the emission of vacuum ultraviolet (VUV) emission.…

Negative ion production with conventional multicusp plasma chambers utilizing 2.45 GHz microwave heating is demonstrated. The experimental results were obtained with the multicusp plasma chambers and extraction systems of the RFdriven RADIS…

Important features of Electron Cyclotron Resonance Ion Source (ECRIS) operation are accurately reproduced with a numerical code. The code uses the particle-in-cell technique to model a dynamics of ions in ECRIS plasma. It is shown that gas…

A simple table-size ECR plasma generator operates in the ATOMKI without axial magnetic trap and without any particle extraction tool. Radial plasma confinement is ensured by a NdFeB hexapole. The table-top ECR is a simplified version of the…

Microwave plasmas are a promising technology for energy-efficient CO$_{2}$ valorization via conversion of CO$_{2}$ into CO and O$_2$ using renewable energies. A 2.45 GHz microwave plasma torch with swirling CO$_{2}$ gas flow is studied in a…

In simulations of a 10PW laser striking a solid we demonstrate the possibility of producing a pure electron-positron plasma by the same processes as those thought to operate in high-energy astrophysical environments. A maximum positron…

The paper reports on a new plasma startup scenario in the Gas Dynamic Trap (GDT) magnetic mirror device. The primary 5 MW neutral beam injection (NBI) plasma heating system fires into a sufficiently dense plasma target ("seed plasma"),…

Plasmas generated using energetic electron beams are well known for their low electron temperature ($T_{e}$) and plasma potential, which makes them attractive for atomic-precision plasma processing applications such as atomic layer etch and…

Extra Ordinary (X) mode conversion to Bernstein wave near Upper Hybrid Resonance (UHR) layer plays an important role in plasma heating through cyclotron resonance. Wave generation at UHR and parametric decay at high power has been observed…

In simulations of a 12.5PW laser (focused intensity I = 4x10^23W/cm^2) striking a solid aluminium target 10% of the laser energy is converted to gamma-rays. A dense electron-positron plasma is generated with a maximum density of 10^26/m^3;…

We have performed a systematic study of the Bremsstrahlung emission from the electrons in the plasma of a commercial 14.5 GHz Electron-Cyclotron Resonance Ion Source. The electronic spectral temperature and the product of ionic and…

Energy distribution of electrons in the plasma sustained by the electron-cyclotron resonance (ECR) discharge has a complicated shape as a function of various parameters that still remains unknown. Meanwhile, it is an important plasma…