相关论文: Control of Grid-Forming VSCs: A Perspective of Ada…
Grid-forming voltage source converter (GF-VSC) has been identified as the key technology for the operation of future converter-dominated power systems. Among many other issues, transient stability of this type of power systems remains an…
Grid-connected inverters are required to operate stably under a wide range of grid conditions. However, conventional grid-following (GFL) control may suffer from instability under weak-grid conditions, while grid-forming (GFM) control may…
Grid-forming (GFM) control has been considered a promising solution for accommodating large-scale power electronics converters into modern power grids thanks to its grid-friendly dynamics, in particular, voltage source behavior on the AC…
Grid-forming voltage source converters (GFM-VSCs) play a crucial role in the stability of power systems with large amounts of converter-based generation. Transient stability (angle stability under large disturbances) is a critical limiting…
This paper investigates the design and analysis of a novel grid-forming (GFM) control method for grid-connected converters (GCCs). The core novelty lies in a virtual flux observer-based synchronization and load angle control method. The…
The renewable energy is connected to the power grid through power electronic converters, which are lack of make the inertia of synchronous generator/machine (SM) be lost. The increasing penetration of renewable energy in power system…
This paper investigates power swing characteristics of grid-forming voltage source converter (GFM-VSC) systems considering the current limitation mode in both non-inertial and inertial GFM-VSC systems. Following grid faults, non-inertial…
In power systems with high penetration of power electronics, grid-forming control is proposed to replace traditional Grid-Following Converter (GFL) in order to improve the overall system strength and resist small-signal instability in weak…
Due to the energy crisis and environmental pollution, the installed capacity of inverter-based resources (IBRs) in power grids is rapidly increasing, and grid-following control (GFL) is the most prevalent at present. Meanwhile, grid-forming…
This paper demonstrates the key features of a control system applicable to inverter-based resources (IBR), which is based on grid-forming technology. Such resources are classified as grid-forming or grid-following converters based on the…
Having sufficient grid-forming sources is one of the necessary conditions to guarantee the stability in a power system hosting a very large share of inverter-based generation. The grid-forming function has been historically fulfilled by…
Future power systems will include high shares of inverter-based generation. There is a general consensus that for allowing this transition, the Grid-Forming (GFM) control approach would be of great value. This article presents a GFM control…
Grid-forming voltage source converters (GFM-VSCs) are emerging as a solution for integrating renewable energy resources (RERs) into power systems. GFM-VSCs need a self-synchronisation strategy to ensure that all converters and generators in…
This article introduces two control frameworks: one for Grid-Following (GFL) inverters aiding Grid-Forming (GFM) inverters in voltage regulation during large contingency events and optimizing power transactions under normal conditions; and…
Virtual oscillator control is the latest control technique for grid-forming inverters. Virtual Oscillator based Controllers (VOCs) provide all the steady-state droop functionalities of conventional droop controllers and, in addition, the…
Modern power systems increasingly demand converter-driven generation systems that integrate seamlessly with grid infrastructure. Grid-based converters are particularly advantageous, as they operate in harmony with conventional synchronous…
An inevitable consequence of the global power system transition towards nearly 100% renewable-based generation is the loss of conventional bulk generation by synchronous machines, their inertia, and accompanying frequency and voltage…
In order to improve dynamic characteristics of the power system with high-proportion renewable energy sources (RESs), it is necessary for the voltage source converter (VSC), interfaces of RESs, to provide inertial and frequency regulation.…
The grid-forming converter is an important unit in the future power system with more inverter-interfaced generators. However, improving its performance is still a key challenge. This paper proposes a generalized architecture of the…
We consider the problem of grid-forming control of power converters in low-inertia power systems. Starting from an average-switch three-phase inverter model, we draw parallels to a synchronous machine (SM) model and propose a novel…