相关论文: A comparison of syntheses approaches towards funct…

The perovskite (1-x)YMnO$_3$-xBiFeO$_3$ binary system is very promising because of its multiferroic end members. Nanocrystalline phases have been recently obtained by mechanosynthesis across the system, and the perovskite structural…

Reducing the formation temperature of single-phase multioxides is one of the classic challenges in ceramic processing, including wet-chemical synthesis routes. Toward pursuing this aim for diopside (MgCaSi2O6), the merit of different…

The potential utilization of two-stage sintering for the production of highly dense and pure nickel diniobate (Ni4Nb2O9) ceramics with low firing temperature was demonstrated. Effects of designed sintering conditions on phase formation,…

In this work we demonstrate a NASICON film sintered in situ onto a fused silica substrate. This production method drastically reduces the manufacturing time by combining the use of a spray-coated sol-gel solution and near-infrared (NIR)…

Conductive ceramics played an important role in industries and manufactures due to their wide applications on electronics devices. Many synthesis approaches to prepare ceramics have been developing rapidly in the few decades. One of the…

In this report we present a systematic study on the preparation of Co:ZnO ceramics via standard solid-state route from different Co precursors (Co3O4, CoO and metallic Co) and atmospheres (O2 and Ar). Particular emphasis was done on the…

Densified silica can be obtained by different pressure and temperature paths and for different stress conditions, hydrostatic or including shear. The density is usually the macroscopic parameter used to characterize the different compressed…

As candidate tritium breeder materials for use in the ITER helium cooled pebble bed, ceramic multiphasic compounds lying in the region of the quasi-binary lithium metatitanate- lithium orthosilicate system may exhibit mechanical and…

Series of metastable Me1-xZnxO solid solutions (Me = Ni2+, Co2+, Fe2+, Mn2+) with the rocksalt (rs) crystal structure have been synthesized from the binary oxides by quenching from 7.7 GPa and 1450-1650 K. Phase composition of the samples,…

We propose a novel approach of wet electrospinning to yield fiber-reinforced polymer ceramic composites, where a reactive ceramic precursor gel is used as a collector. We illustrate our approach by generating polyethylene oxide (PEO) fibers…

The paper reports on the preparation of xenotime-structured ceramics by the Spark Plasma Sintering (SPS) method. Phosphates Y$_{0.95}$Gd$_{0.05}$PO$_4$ (YPO$_4$:Gd) were obtained by the sol-gel method. The synthesized nanopowders are…

Photonic sintering (PS) offers an ultra-fast, contact-free alternative to conventional sintering and has demonstrated its potential for enhancing the sinterability of acceptor-doped barium zirconate (BZY) ceramics. However, a central…

A new and known barium cerates doped by In and Ga were synthesized in air at 1700 K. The synthesis was performed by solid state reactions from BaCO3, CeO2, In2O3 or Ga2O3. X-ray diffraction profiles of the powdered samples were obtained…

Samarium doped BiFeO3 compounds having nano-size crystallites were prepared by the ethylene glycol assisted sol-gel synthesis method. X-ray diffraction and SEM measurements as well as Raman spectroscopy and FTIR experiments were used to…

NdFeO3 modified polycrystalline ceramics with composition (NdFeO3)0.1-(Ba0.7Sr0.3TiO3)0.9 (NFBST) ceramics have been synthesized via solid-state reaction route. The Rietveld refinement of the XRD data confirmed the existence of a tetragonal…

Ceramic based materials covered with a mixture of mullite and zircon on the top, strengthened by the addition of zinc and magnesium compounds at different rates (37 % and 50 %) and made by a co-precipitation method are studied. The…

Solid-state synthesis from powder precursors is the primary processing route to advanced multicomponent ceramic materials. Designing ceramic synthesis routes is usually a laborious, trial-and-error process, as heterogeneous mixtures of…

Selective laser reaction sintering techniques (SLRS) techniques were investigated for the production of near net-shape non-oxide ceramics including SiC, Si$_3$N$_4$, and HfC/SiC composites that might be compatible with prevailing powder bed…

Ce/Cr codoped TiO2 nanoparticles were synthesized using sol gel and Pechini methods with heat treatment at 400 C for 4 h. A conventional sol gel process produced well-crystallized anatase, while Pechini synthesis yielded less ordered…

Cu2O nanorods have been deposited on soda-lime glass (SLG) substrates by the modified SILAR technique by varying the concentration of NaCl electrolyte into the precursor complex solution. The structural, electrical, and optical properties…