相关论文: IEC-61850 Performance Evaluation in a 5G Cellular …
The IEC 61850 standard is being largely used in the Smart Grid (SG) context mainly due to its ability to address communication, interoperability and migration issues. IEC 61850 currently aims at internal substation communication.…
Smart grids are increasingly exposed to sophisticated cyber threats due to their reliance on interconnected communication networks, as demonstrated by real world incidents such as the cyberattacks on the Ukrainian power grid. In IEC61850…
Present-day developments, in electrical power transmission and distribution, require considerations of the status quo. In other meaning, international regulations enforce increasing of reliability and reducing of environment impact,…
User Datagram Protocol (UDP) is a commonly used protocol for data transmission in small embedded systems. UDP as such is unreliable and packet losses can occur. The achievable data rates can suffer if optimal packet sizes are not used. The…
Fifth-generation (5G) cellular networks promise higher data rates, lower latency, and large numbers of interconnected devices. Thereby, 5G will provide important steps towards unlocking the full potential of the Internet of Things (IoT). In…
With the development of 5G technology and low-power wireless communication technology, a large number of IOT devices are introduced into energy systems. Existing IOT communication protocols such as MQQT and COAP cannot meet the requirements…
Fifth-generation (5G) networks enable a variety of use cases that require differentiated connectivity, e.g., Ultra-Reliable and Low-Latency Communications (URLLC), enhanced Mobile Broadband (eMBB), and massive Machine Type Communication…
Cellular phones, wireless laptops, personal portable devices that supports both voice and data access are all examples of communicating devices that uses wireless communication. Sine TCP/IP (and UDP) is the dominant technology in use in the…
This study is a first attempt to experimentally explore the range of performance bottlenecks that 5G mobile networks can experience. To this end, we leverage a wide range of measurements obtained with a prototype testbed that captures the…
With transition towards 5G, mobile cellular networks are evolving into a powerful platform for ubiquitous large-scale information acquisition, communication, storage and processing. 5G will provide suitable services for mission-critical and…
Open-source software and Commercial Off-The-Shelf hardware are finally paving their way into the 5G world, resulting in a proliferation of experimental 5G testbeds. Surprisingly, very few studies have been published on the comparative…
This paper presents the concept, architectural design, and performance evaluation of a 5G Mobile Cell (MC) used to provide 5G wireless connectivity to User Equipment (UE) in areas with limited fixed 5G infrastructures or subject to adverse…
As the research community starts to address the* key features of 6G cellular standards, one of the agreed bridge topics to be studied already in 5G advanced releases is Integrated Sensing and Communication (ISAC). The first efforts of the…
Vehicles embed lots of sensors supporting driving and safety. Combined with connectivity, they bring new possibilities for Connected, Cooperative and Automated Mobility (CCAM) services that exploit local and global data for a wide…
Cellular-connected UAV systems have enabled a wide range of low-altitude aerial services. However, these systems still face many challenges, such as frequent handovers and the inefficiency of traditional transport protocols. To better study…
5G is being designed as a common platform where multiple vertical applications will be able to co-exist and grow in a seamless manner. The diversity of the vertical requirements as well as the particular features of the 5G network itself,…
Data-driven approaches and paradigms have become promising solutions to efficient network performances through optimization. These approaches focus on state-of-the-art machine learning techniques that can address the needs of 5G networks…
In this work, we present a small-scale testbed for evaluating the real-life performance of cellular V2X (C-V2X) applications on 5G cellular networks. Despite the growing interest and rapid technology development for V2X applications,…
The rise in embedded and IoT device usage comes with an increase in LTE usage as well. About 70\% of an estimated 18 billion IoT devices will be using cellular LTE networks for efficient connections. This introduces several challenges such…
TCP is the De facto standard for connection oriented transport layer protocol, while UDP is the De facto standard for transport layer protocol, which is used with real time traffic for audio and video. Although there have been many attempts…