相关论文: Effect of Sintering Temperature on Microstructure …
Samples of $\alpha$-SiC have been sintered with liquid phase (LPS) to 1950 $^\circ$C, in atmosphere of argon and processing times between 1 and 7 hours. Using scanning electron microscopy (SEM) the microstructure of the samples has been…
The impact heat accumulated during the late stage of planetary accretion can melt a significant part or even the entire mantle of a terrestrial body, giving rise to a global magma ocean. [...] Assuming fractional crystallization of the…
Several measurements, including the data from the laser spectrometer in the Sample Analysis at Mars instrument suite on the Curiosity Rover in Gale crater, have measured seasonal variations in atmospheric methane at the 0.7 ppbv (parts per…
Many countries and commercial organizations have shown great interest in constructing Martian base. In-situ resource utilization (ISRU) provides a cost-effective way to achieve this ambitious goal. In this paper, we proposed to use Martian…
Room and high temperature mechanical properties of reactive magnetron sputtered TaSiN coatings were measured using nanoindentation (between 25C and 500C). Fracture toughness was also evaluated at a similar temperature range using the…
A systematic study on the synthesis of the Ru-1212 compound by preparing a series of samples that were annealed at increasing temperatures and then quenched has been performed. It results that the optimal temperature for the annealing lies…
The influence that the atmosphere (N_2 or Ar) and sintering time have on microstructure evolution in liquid-phase-sintered alpha-sic and on its mechanical properties at high temperature was investigated. The microstructure of the samples…
Aeolian sediment transport is observed to occur on Mars as well as other extraterrestrial environments, generating ripples and dunes as on Earth. The search for terrestrial analogues of planetary bedforms, as well as environmental…
We present a thermal activated solvent bonding technique for the formation of embedded microstrucutres in polymer. It is based on the temperature dependent solubility of polymer in a liquid that is not a solvent at room temperature. With…
A new experimental test bed has been designed, built, and tested to evaluate the effect of the systems parameters on a reciprocating Active Magnetic Regenerator (AMR) near room temperature. Bulk gadolinium was used as the refrigerant,…
New determinations of effective temperatures of 23 magnetic, chemically peculiar (mCP) stars were obtained from a fit of metal enhanced model atmospheres to the observed spectral energy distributions (SED) from UV to red. The…
Estimating surface properties such as porosity and grain sizes is key for planning lander missions and landing site selection on icy moons. However, spaceborne instruments do not measure the regolith properties directly: instead, they…
Effect of the temperature and magnetic field induced martensitic transformation (MT) on the electronic structure and some physical properties of bulk Fe$_{45.2}$Mn$_{25.9}$Ga$_{28.9}$ Heusler alloy has been investigated. {According to the…
This study shows the development and performance assessment of a novel set-up that enables the research of structural materials for fusion reactors, by making possible simultaneous application of temperature (up to 450$^{\circ}$C) and…
Water has been stored in the Martian mantle since its formation, primarily in nominally anhydrous minerals. The short-lived early hydrosphere and intermittently flowing water on the Martian surface may have been supplied and replenished by…
We report a systematic study on the effect of sintering temperature on the structural and superconducting properties of nominal SmO0.8F0.2FeAs fabricated by simple one-step solid state reaction method. A detailed correlation between the…
The magnetic and magnetocaloric properties of polycrystalline La0.70(Ca0.30-xSrx)MnO3:Ag 10% manganite have been investigated. All the compositions are crystallized in single phase orthorhombic Pbnm space group. Both, the Insulator-Metal…
The development of two-dimensional (2D) room temperature magnets is of great significance to the practical application of spintronic devices. However, the number of synthesized intrinsic 2D magnets is limited and the performances of them…
With NASA's planned return to the moon and possibly with lunar outposts being formed, repeated landings at the same site will be necessary. Understanding rocket plume interaction with lunar and Martian surfaces is of paramount importance in…
La$_{0.67}$Sr$_{0.33}$Mn$_{1-x}$Ti$_x$O$_{3}$ ($0 \le x \le 0.20$) polycrystalline materials are prepared by employing lower annealing temperature compared to the temperatures reported for the materials of the same composition. The…