相关论文: Spectral Features for Re-entry Break-up Event Iden…
Fracture in aluminum alloys with precipitates involves at least two mechanisms, namely, ductile fracture of the aluminum-rich matrix and brittle fracture of the precipitates. In this work, a coupled crystal plasticity-phase field model for…
The breakup of glass and alumina plates due to planar impacts on one of their lateral sides is studied. Particular attention is given to investigating the spatial location of the cracks within the plates. Analysis based on a…
Stacking faults (SF) are important structural defects that play an essential role in the deformation of engineering alloys. However, direct observation of stacking faults at the atomic scale can be challenging. Here, we use the analytical…
Experimental investigations on the effect of thicknesses on mixed-mode I/II fracture are performed with an aluminum alloy with thicknesses of 2, 4, 8 and 14 mm. It is found that under pure-mode I loading condition, the loading capacity per…
We report here experimental evidence of the reflection of a large fraction of a beam of low energy antiprotons by an aluminum wall. This derives from the analysis of a set of annihilations of antiprotons that come to rest in rarefied helium…
Inelastic scattering of electrons incident on a solid surface is determined by the two properties: (i) electronic response of the target system and (ii) the detailed quantum-mechanical motion of the projectile electron inside and in the…
Microscopic description in the study of immiscibility and segregating properties of liquid metallic binary alloys has gained a renewed scientific and technological interests during the last eight years for the physicists, metallurgists and…
The coherence of quantum dot qubits fabricated in semiconductors is often limited by charge noise from defects in gate dielectrics, which are material- and process-dependent. Characterizing these defects is an important step towards…
Momenta and masses of heavy projectile fragments (Z >= 8), produced in collisions of 197Au with C, Al, Cu and Pb targets at E/A = 600 MeV, were determined with the ALADIN magnetic spectrometer at SIS. An analysis of kinematic correlations…
The fragmentation of alumina and glass plates due to lateral impact is studied. A few hundred plates have been fragmented at different impact velocities and the produced fragments are analyzed. The method employed in this work allows one to…
Dislocations in a material will, when present in enough numbers, change the speed of propagation of elastic waves. Consequently, two material samples, differing only in dislocation density, will have different elastic constants, a quantity…
Rapid solidification leads to unique microstructural features, where a less studied topic is the formation of various crystalline defects, including high dislocation densities, as well as gradients and splitting of the crystalline…
This paper focuses on the development of the atomistic framework for determining the lower scale mechanical parameters of single components of a metal matrix composite for final application to a micromechanical damage model. Here, the…
A preliminary study of the fragmentation properties of charged particle jets as a function of the Underlying Multiplicity (UM) is presented. The UM is defined such that it can be related to the global soft event characteristics by excluding…
Re-entrant melting (in which a substance's melting point starts to decrease beyond a certain pressure) is believed to be an unusual phenomenon. Among the elements, it has so far only been observed in a very limited number of species, e.g.,…
Challenges associated with in-service mechanical degradation of Li-ion battery cathodes has prompted a transition from polycrystalline to single crystal cathode materials. Whilst for single crystal materials, dislocation-assisted crack…
Coherent misfitting precipitates in elastically stressed media such as $\gamma \prime$ particles in nickel-based super-alloys show various splitting patterns such as doublets, quartets, or octets due to their misfit strain energy. While it…
Nanoindentation is a powerful tool capable of providing fundamental insights of material elastic and plastic response at the nanoscale. Alloys at nanoscale are particularly interesting as the local heterogeneity and deformation mechanism…
Hard splittings in the evolution of a jet may be modified by the presence of a dense strongly interacting medium. Grooming procedures can be used to isolate such hard components of a jet and allows one to focus on the two subjets resulting…
To measure the main characteristics of radiative neutron decay, namely its relative intensity BR (branching ratio), it is necessary to measure the spectra of double coincidences between beta-electron and proton as well as the spectra of…