相关论文: Slip competition and rotation suppression in tanta…
When a metallic specimen is plastically deformed, its underlying crystal structure must often rotate in order to comply with its macroscopic boundary conditions. There is growing interest within the dynamic compression community in…
Wehrenberg et. al. [Nature 550 496 (2017)] used ultrafast in situ x-ray diffraction at the LCLS x-ray free-electron laser facility to measure large lattice rotations resulting from slip and deformation twinning in shock-compressed…
While the mechanical behavior of noble nanoporous metals has been the subject of numerous studies, less is known about their recently developed refractory-based counterparts. Here we report on the mechanical properties, deformation…
Molecular dynamics simulations on tensile deformation of initially defect free single crystal copper nanowire oriented in <001>{100} has been carried out at 10 K under adiabatic and isothermal loading conditions. The tensile behaviour was…
The yield surface in crystal plasticity can be approached from various directions during mechanical loading. We consider the competition between nanoindentation and tensile loading towards plastic yielding. For this purpose, we develop a…
Hexagonal close-packed (hcp) titanium exhibits a complex temperature-dependent mechanical response that is central to its use in structural applications. We employ large-scale molecular dynamics simulations to investigate the…
Here we use large-scale molecular dynamics (MD) simulations of the high-rate deformation of nanocrystalline tantalum to investigate the processes associated with plastic deformation for strains up to 100%. We use initial atomic…
A physically-informed continuum crystal plasticity model is presented to elucidate the deformation mechanisms and dislocation evolution in body-centered-cubic (bcc) tantalum widely used as a key structural material for mechanical and…
Metal-corroles are macrocycle organic molecules with numerous practical applications. In particular, copper corroles exhibit an interesting saddled geometry, which has attracted significant attention from theoreticians and experimentalists…
Using molecular-dynamics simulation and finite-element modelling, we simulate nanoindentation into the three principal surfaces -- the (100), (110) and (111) surface -- of Cu and Al. In the elastic regime, the simulation data agree fairly…
Tribological loading of metals induces microstructural changes by dislocation-mediated plastic deformation. During continued sliding, combined shear and lattice rotation result in the formation of crystallographic textures which influence…
Atomistic simulations are performed to probe the anisotropic deformation in the compressions of face-centred-cubic metallic nanoparticles. In the elastic regime, the compressive load-depth behaviors can be characterized by the classical…
Nanocrystalline metals, i.e. metals in which the grain size is in the nanometer range, have a range of technologically interesting properties including increased hardness and yield strength. We present atomic-scale simulations of the…
Coherent x-ray micro-diffraction and local mechanical loading can be combined to investigate the mechanical deformation in crystalline nanostructures. Here we present measurements of plastic deformation in a copper crystal of sub-micron…
Understanding deformation in polycrystalline metals is critical to use them in high-value high-risk applications. We present in-situ characterisation of plastic deformation of zirconium, a hexagonal closed packed (HCP), metal. Analysis of…
Nanoindentation was carried out on pure tungsten carbide (WC) on the basal (0001) and prismatic (1010) planes, using Berkovich and spherical indenters, in both single load and multi-load testing. The work focuses on correlating the…
The dynamics of the release of stored energy during annealing along two different crystallographic planes i.e.{111} and {220} in deformed copper have been investigated using in-situ X-ray diffraction measurements at 458K and 473K…
The plastic response of beryllium was investigated during loading by laser-induced shock waves, using surface velocimetry and in-situ x-ray diffraction. Results from loading by thermal x-rays (hohlraum) were consistent with more extensive…
Plastic deformations in crystals often produce textures in the form of randomly oriented patches of the unstressed lattice. We use a novel mesoscopic Landau-type model of crystal plasticity to show that in such textures large…
Along with high strength, plasticity is what makes metals so widely usable in our material world. Both strength and plasticity properties of a metal are defined by the motion of dislocations - line defects in the crystal lattice that divide…