相关论文: Modeling the debonding process of osseointegrated …
Cementless implants are widely used in orthopedic and oral surgery. However, debonding-related failure still occurs at the bone-implant interface. It remains difficult to predict such implant failure since the underlying osseointegration…
Short and long-term stabilities of cementless implants are strongly determined by the interfacial load transfer between implants and bone tissue. Stress-shielding effects arise from shear stresses due to the difference of material…
Contact involving soft materials often combines dry adhesion, sliding friction, and large deformations. At the local level, these three aspects are rarely captured simultaneously, but included in the theoretical models by Mergel et al.…
In silico testing of implant materials is a research area of high interest, as cost- and labour-intensive experiments may be omitted. However, assessing the tissue-material interaction mathematically and computationally can be very complex,…
We present a barrier method for treating frictional contact on interfaces embedded in finite elements. The barrier treatment has several attractive features, including: (i) it does not introduce any additional degrees of freedom or…
Interface cracking is one of the most prominent failure modes in fibre reinforced polymer (FRP) composites. Recent trends in high-tech applications of FRP composites exploit the limits of the load bearing capacity, generally encompassing…
Networks of flexible filaments often involve regions of tight contact. Predictively understanding the equilibrium configurations of these systems is challenging due to intricate couplings between topology, geometry, large nonlinear…
The wide adoption of thermoplastic composites to reduce weight in structural parts requires reliable numerical methods to account for debonding between overmolded parts. Although cohesive elements are effective for debonding, the need for…
We have recently proposed an efficient computation method for the frictionless linear elastic axisymmetric contact of coated bodies [A. Perriot and E. Barthel, J. Mat. Res. 19 (2004) 600]. Here we give a brief description of the approach.…
A new computer haptics algorithm to be used in general interactive manipulations of deformable virtual objects is presented. In multimodal interactive simulations, haptic feedback computation often comes from contact forces. Subsequently,…
Interference-fit joints are typically adopted to produce permanent assemblies among mechanical parts. The resulting contact pressure is generally used for element fixing or to allow load transmission. Nevertheless, some special designs take…
An extension to the interface finite element with eMbedded Profile for Joint Roughness (MPJR interface finite element) is herein proposed for solving the frictional contact problem between a rigid indenter of any complex shape and an…
Quantitative ultrasound can be used to characterize the evolution of the bone-implant interface (BII), which is a complex system due to the implant surface roughness and to partial contact between bone and the implant. The aim of this study…
Delamination is a critical mode of failure that occurs between plies in a composite laminate. The cohesive element, developed based on the cohesive zone model, is widely used for modeling delamination. However, standard cohesive elements…
A coupled cohesive zone model based on an analogy between fracture and contact mechanics is proposed to investigate debonding phenomena at imperfect interfaces due to thermomechanical loading and thermal fields in bodies with cohesive…
We study the mechanical contact between a deformable body with a wavy surface and a rigid flat taking into account pressurized fluid trapped in the interface. A finite element model is formulated for a general problem of trapped fluid for…
The damping of built-up structures stems largely from the microscopic dry frictional interactions in the contact interfaces. The accurate prediction of friction damping has been an important scientific aim of the past several decades.…
This paper investigates a framework (CATCH-FORM-3D) for the precise contact force control and surface deformation regulation in viscoelastic material manipulation. A partial differential equation (PDE) is proposed to model the…
A novel implementation of the traditional node-to-node Coulomb contact-friction problem is presented that utilizes run-time parameter updates on conventional elasto-plastic elements. The two-noded elements are defined by an independent…
Osseointegration is crucial to the success of biomedical implants. Additive manufacturing of implants offers a high degree of design freedom, enabling precise control over implant geometry and material composition. Bioactive glass (BG) can…