相关论文: Microstructure and correlated mechanical propertie…
We have investigated the structural and magnetic properties of Sm(Co0.7Fe0.1Ni0.12Zr0.04B0.04)7.5 melt spun ribbons. Samples were arc melted then melt spun at 37 m/s up to 55 m/s to obtain ribbon for powdering. Annealing has been performed…
High coercivity, the highest for Cu-free 2 : 17 Sm-Co ribbons, has been obtained in as-spun (= 211 kOe) and short time annealed (= 232 kOe) samples of Sm(CobalFe Zr B)7 5 alloys, with varying B, Zr, and Fe content (= 0-0 06, = 0-0 16, = 0…
Ni-Mn-based metamagnetic shape-memory alloys exhibit a giant thermal response to magnetic fields and uniaxial stress which can be utilized in single caloric or multicaloric cooling concepts for energy-efficient and sustainable…
Ultrafine-grained aluminum alloys offer interesting multifunctional properties with a combination of high strength, low electrical resistivity, and low density. However, due to thermally induced grain coarsening, they typically suffer from…
It was shown that anomalous resistivity behavior of the $Cu-Mn-Al$ ribbons is explained by the s-d interaction between conduction electrons and the clustered Mn atoms. While nuclear magnetic resonance measurements show the antiferromagnetic…
First-principles alloy theory, formulated within the exact muffin-tin orbitals method in combination with the coherent-potential approximation, is used to study the mechanical properties of ferromagnetic body-centered cubic (bcc)…
Magnetoelastic anisotropy and <100> texture are crucial for promoting magnetostriction in Galfenol (Fe-Ga). Given that single-crystal Fe-Ga remains technically demanding and low magnetostriction of polycrystal, we explore melt-spun as an…
This study focuses on the microstructure's evolution upon different aging conditions of a high-strength low-density steel with a composition of Fe-28Mn-9Al-1C. The steel is hot-rolled, subsequently quenched without any solution treatment,…
Additively manufactured (AM) alloys have heterogeneous microstructures with broad grain size distributions and highly anisotropic and/or non-convex grain shapes. AM components can have complex geometries and porosity which may affect the…
A novel medium Mn steel of composition Fe-12Mn-4.8Al-2Si-0.32C-0.3V was manufactured with 1.09 GPa yield strength, 1.26 GPa tensile strength and 54% elongation. The thermomechanical process route was designed to be industrially translatable…
Novel multicaloric cooling utilizing the giant caloric response of Ni-Mn-based metamagnetic shape-memory alloys to different external stimuli such as magnetic field, uniaxial stress and hydrostatic pressure is a promising candidate for…
Further property enhancement of alnico, an attractive near-term, non-rare-earth permanent magnet alloy system, primarily composed of Al, Ni, Co, and Fe, relies on improved morphology control and size refinement of its complex spinodally…
Exchange-coupled nanocomposites are considered as the most promising materials for production of high-energy performance permanent magnets, which can exceed neodymium ones in terms of energy product. In this work, micromagnetic simulations…
The mechanical behavior of two nanocrystalline Al alloys, Al-Mg-Y and Al-Fe-Y, is investigated with in-situ micropillar compression testing. Both alloys were strengthened by a hierarchical microstructure including grain boundary…
Magneto-impedance (MI) effects have been observed for amorphous Fe73.5Nb3Cu1Si13.5B9 ribbon which has been excited by an a.c. magnetic field parallel to the length of the ribbon. Maximum relative change in MI as large as -99% was observed…
The structural, magnetic, magnetocaloric and magnetotransport properties of Ni46Co4Mn38Sb12 melt spun ribbons have been systematically investigated. The partially ordered B2 phase of the as-spun ribbon transforms to fully ordered L21 phase…
Many emerging applications in microscale engineering rely on the fabrication of three-dimensional architectures in inorganic materials. Small-scale additive manufacturing (AM) aspires to provide flexible and facile access to these…
Understanding the phenomena at the nanometer scale is of fundamental importance for future improvements of desired properties of nanomaterials. We report a detailed investigation of the microstructure and the resulting magnetic anisotropy…
Ni-Mn-based Heusler alloys like Ni-Mn-Sn show an elastocaloric as well as magnetocaloric effect during the magneto-structural phase transition, making this material interesting for solid-state cooling application. Material processing by…
This work demonstrates the development of a strong and ductile medium entropy alloy by employing conventional alloying and thermomechanical processing to induce partial recrystallization (PR) and precipitation strengthening in the…