相关论文: Beamforming using Digital Piezoelectric MEMS Micro…

Beamforming is central to the processing function of all phased arrays and becomes particularly challenging with a large number of antenna element (e.g. >100,000). The ability to beamform efficiently with reasonable power requirements is…

Advances in object tracking and acoustic beamforming are driving new capabilities in surveillance, human-computer interaction, and robotics. This work presents an embedded system that integrates deep learning-based tracking with beamforming…

A maskless post-processing technique for CMOS chips is developed that enables the fabrication of RF MEMS parallel-plate capacitors with a high quality factor and a very compact size. Simulations and measured results are presented for…

This article presents a comprehensive study and design methodology of co-integrated oscillators for nano mass sensing application based on resonant Nano-Electro-Mechanical-System (NEMS). In particular, it reports the capacitive with the…

MEMS technology has been developed rapidly in the last few years. More and more special micro structures were discussed in several publications. However, all of the structures were produced by consist of the three fundamental structures,…

We report a waveform-selective metasurface that operates at 2.4 GHz band, i.e. one of ISM (Industrial, Scientific and Medical) bands. This structure gives us an additional degree of freedom to control electromagnetic waves and absorbs a…

This paper presents an end-to-end design method for the synthesis of dielectric metasurfaces with modulated thickness that are able to realize desired radiation patterns in the far-field with high precision. The method relies on integral…

We designed and simulated freestanding dielectric optical metasurfaces based on arrays of etched nanoholes in a silicon membrane. We showed $2\pi$ phase control and high forward transmission at mid-infrared wavelengths by tuning the…

The purpose of this report is to document the noise performance of a complex beamforming array antenna system and to characterize the recently developed noise measurement facility called THACO, which was developed at ASTRON. The receiver…

A secure downlink transmission system which is exposed to multiple eavesdroppers and is appropriate for Internet of Things (IoT) applications is considered. A worst case scenario is assumed, in the sense that, in order to enhance their…

The potential of using of millimeter wave (mmWave) frequency for future wireless cellular communication systems has motivated the study of large-scale antenna arrays for achieving highly directional beamforming. However, the conventional…

Using optical diffraction, we study the mechanical vibrations of an array of micromechanical resonators. Implementing tunable electrostatic coupling between the suspended, doubly-clamped Au beams leads to the formation of a band of…

Given the high throughput requirement for 5G, merging millimeter wave technologies and multi-user MIMO seems a very promising strategy. As hardware limitations impede to realize a full digital architecture, hybrid MIMO architectures, using…

This work introduces the Cleanformer, a streaming multichannel neural based enhancement frontend for automatic speech recognition (ASR). This model has a conformer-based architecture which takes as inputs a single channel each of raw and…

To enable user diversity and multiplexing gains, a fully digital precoding multiple input multiple output (MIMO) architecture is typically applied. However, a large number of radio frequency (RF) chains make the system unrealistic to…

Future wireless communications will rely on multiple-input multiple-output (MIMO) beamforming operating at millimeter wave (mmWave) frequency bands to deliver high data rates. To support flexible spatial processing and meet the demands of…

Millimeter wave (mmWave) signals experience orders-of-magnitude more pathloss than the microwave signals currently used in most wireless applications. MmWave systems must therefore leverage large antenna arrays, made possible by the…

Speech enhancement performance degrades significantly in noisy environments, limiting the deployment of speech-controlled technologies in industrial settings, such as manufacturing plants. Existing speech enhancement solutions primarly rely…

MOEMS Deformable Mirrors (DM) are key components for next generation instruments with innovative adaptive optics systems, in existing telescopes and in the future ELTs. These DMs must perform at room temperature as well as in cryogenic and…

Piezoelectric FET (PeFET) is a promising non-volatile-memory (NVM) device that integrates a piezoelectric (PE)/ferroelectric (FE) capacitor with a 2D transistor. It uses the polarization of the FE capacitor for bit-storage and…