相关论文: An Accurate Smartphone Battery Parameter Calibrati…
Accurate state estimation of large-scale lithium-ion battery packs is necessary for the advanced control of batteries, which could potentially increase their lifetime through e.g. reconfiguration. To tackle this problem, an enhanced…
This paper investigates how to achieve both low-power operations of sensor nodes and accurate state estimation using Kalman filter for internet of things (IoT) monitoring employing wireless sensor networks under radio resource constraint.…
In the Internet of Things (IoT) paradigm, distributed sensors and actuators can observe and act on their environment, communicating wirelessly. In this context, filtering the observations and tracking the network and environment state over…
The Unscented Kalman Filter (UKF) is a ubiquitous tool for nonlinear state estimation; however, its performance is limited by the static parameterization of the Unscented Transform (UT). Conventional weighting schemes, governed by fixed…
Accurate state estimation from heavily quantized measurements is a key challenge in resource-constrained Internet of Things (IoT) sensing and tracking, where battery-powered devices may employ low-resolution analog-to-digital converters…
Dynamic operation of biological processes, such as anaerobic digestion (AD), requires reliable process monitoring to guarantee stable operating conditions at all times. Unscented Kalman filters (UKF) are an established tool for nonlinear…
The minimum error entropy (MEE) has been extensively used in unscented Kalman filter (UKF) to handle impulsive noises or abnormal measurement data in non-Gaussian systems. However, the MEE-UKF has poor numerical stability due to the inverse…
A turbulent boundary layer is an essential flow case of fundamental and applied fluid mechanics. However, accurate measurements of turbulent boundary layer parameters (e.g., friction velocity $u_\tau$ and wall shear $\tau_w$), are…
We make modifications to the unscented Kalman filter (UKF) which bestow almost complete practical identifiability upon a lumped-parameter cardiovascular model with 10 parameters and 4 output observables - a highly non-linear, stiff problem…
This paper presents a neural network-based Unscented Kalman Filter (UKF) to estimate and track the pose (i.e., position and orientation) of a known, noncooperative, tumbling target spacecraft in a close-proximity rendezvous scenario. The…
Most nonlinear filters used in spacecraft navigation are based on a linear approximation of the optimal minimum mean square error estimator. The Unscented Kalman Filter (UKF) handles nonlinear dynamics through a sigma-point transform, but…
The unscented Kalman filter (UKF) is a commonly used algorithm capable of estimating the states of nonlinear dynamic systems. It carefully chooses a set of sample points, called sigma points that capture the nonlinear system states…
This study presents a method of estimating battery cell core and surface temperature using a thermal model coupled with electrical impedance measurement, rather than using direct surface temperature measurements. This is advantageous over…
Heterogeneous sensor setups may entail measurements recorded at varying sampling frequencies, commonly known as multi-rate data. For system identification and state estimation with such data, existing studies mostly focus on data fusion…
Climate change poses significant challenges for accurate climate modeling due to the complexity and variability of non-Gaussian climate systems. To address the complexities of non-Gaussian systems in climate modeling, this thesis proposes a…
Autonomous proximity operations, such as active debris removal and on-orbit servicing, require high-fidelity relative navigation solutions that remain robust in the presence of parametric uncertainty. Standard estimation frameworks…
Detailed dynamical systems' models used in the life sciences may include hundreds of state variables and many input parameters, often with physical meaning. Therefore, efficient and unique input parameter identification, from experimental…
This paper investigates the observability of one of the most commonly used equivalent circuit models (ECMs) for lithium-ion batteries and presents a method to estimate the state of charge (SOC) in the presence of sensor biases, highlighting…
This paper is the second of a two-part series that discusses the implementation issues and test results of a robust Unscented Kalman Filter (UKF) for power system dynamic state estimation with non-Gaussian synchrophasor measurement noise.…
Wireless sensor networks (WSNs) represent a critical research domain within the Internet of Things (IoT) technology. The distributed Kalman filter (DKF) has garnered significant attention as an information fusion method for WSNs. However,…