相关论文: Analysis of the Implication of Current Limits in G…
Grid forming control applied to power converters that interface storage or renewable generation to the power grid, has been identified as a potential solution to facilitate a substantial share of converter-based renewable generation in the…
Modern power systems increasingly demand converter-driven generation systems that integrate seamlessly with grid infrastructure. Grid-based converters are particularly advantageous, as they operate in harmony with conventional synchronous…
An inevitable consequence of the global power system transition towards nearly 100% renewable-based generation is the loss of conventional bulk generation by synchronous machines, their inertia, and accompanying frequency and voltage…
The renewable energy is connected to the power grid through power electronic converters, which are lack of make the inertia of synchronous generator/machine (SM) be lost. The increasing penetration of renewable energy in power system…
Grid-connected inverters are required to operate stably under a wide range of grid conditions. However, conventional grid-following (GFL) control may suffer from instability under weak-grid conditions, while grid-forming (GFM) control may…
Grid-forming (GFM) control has been considered a promising solution for accommodating large-scale power electronics converters into modern power grids thanks to its grid-friendly dynamics, in particular, voltage source behavior on the AC…
High penetration of wind power with conventional grid following controls for inverter-based wind turbine generators (WTGs) weakens the power grid, challenging the power system stability. Grid-forming (GFM) controls are emerging technologies…
Grid-forming control (GFC) has seen numerous technological advances in their control types, applications, and the multitude of services they provide. Some examples of the services they provide include black start, inertial frequency…
This work develops a constraint-aware grid-forming (GFM) control that explicitly accounts for current limits and modulation limits within the GFM oscillator dynamics generating the GFM voltage reference (i.e., phase angle and magnitude).…
In power systems with high penetration of power electronics, grid-forming control is proposed to replace traditional Grid-Following Converter (GFL) in order to improve the overall system strength and resist small-signal instability in weak…
Stability of power grids with synchronous generators (SGs) and renewable generation interfaced with grid-forming converters (GFCs) under dc-side current limitation is studied. To that end, we first consider a simple 2-bus test system and…
An inevitable consequence of the global power system transition towards nearly 100% renewable-based generation is the loss of conventional bulk generation by synchronous machines, their inertia, and accompanying frequency and voltage…
Future power systems will include high shares of inverter-based generation. There is a general consensus that for allowing this transition, the Grid-Forming (GFM) control approach would be of great value. This article presents a GFM control…
This paper investigates power swing characteristics of grid-forming voltage source converter (GFM-VSC) systems considering the current limitation mode in both non-inertial and inertial GFM-VSC systems. Following grid faults, non-inertial…
In this work, we investigate grid-forming (GFM) control for dc/ac power converters in emerging power systems that contain ac and dc networks, renewable generation, and conventional generation. We propose a novel power-balancing GFM control…
The converter control functions to provide the capabilities similar to synchronous generators are referred to as grid forming converters (GFC). Identical to a synchronous machine, a grid forming converter is expected to behave as a voltage…
Grid-forming (GFM) capability requirements are increasingly imposed on grid-connected voltage-source converters (VSCs). Under large grid disturbances, GFM-VSCs need to remain stable while providing GFM services. Yet, such objectives, as…
Grid-forming (GFM) converter is deemed as one enabler for high penetration of renewable energy resources in power system. However, as will be pointed out in this letter, the conventional power-to-frequency (P-f) GFM control will face a…
This paper studies control interactions between grid-forming (GFM) converters exhibited by power and frequency oscillations in a weakly connected offshore wind power plant (WPP). Two GFM controls are considered, namely virtual synchronous…
Due to the energy crisis and environmental pollution, the installed capacity of inverter-based resources (IBRs) in power grids is rapidly increasing, and grid-following control (GFL) is the most prevalent at present. Meanwhile, grid-forming…