相关论文: A Comparison Study of Cellular Deployments in Chic…

As discussions around 6G begin, it is important to carefully quantify the spectral efficiency gains actually realized by deployed 5G networks as compared to 4G through various enhancements such as higher modulation, beamforming, and MIMO.…

Fifth-generation (5G) new radio (NR) deployments are being rolled out in both the C-band (3.3 - 5.0 GHz) and millimeter-wave (mmWave) band (24.5 - 29.5 GHz). For outdoor scenarios, the C-band is expected to provide wide area coverage and…

The spectrum crunch challenge poses a vital threat to the progress of cellular networks and recently prompted the inclusion of millimeter wave (mmWave) and Upper 6GHz (U6G) in the 3GPP standards. These two bands promise to unlock a large…

5G millimeter wave (mmWave) cellular networks have been reported to deliver 1-2 Gbps downlink throughput, via speed-tests. However, these speed-tests capture only a few seconds of throughput and are not representative of sustained…

Communications at frequencies above 10 GHz (the mmWave band) are expected to play a major role for the next generation of cellular networks (5G), because of the potential multi-gigabit, ultra-low latency performance of this technology.…

Fifth Generation (5G) mobile networks mark a significant shift from previous generations of networks. By introducing a flexible design, 5G networks support highly diverse application requirements. Currently, the landscape of previous…

Triggered by the explosion of mobile traffic, 5G (5th Generation) cellular network requires evolution to increase the system rate 1000 times higher than the current systems in 10 years. Motivated by this common problem, there are several…

Deploying fifth-generation (5G) networks in emerging markets demands a balance between performance targets and constraints in budget, spectrum, and infrastructure. We use MATLAB simulations to quantify how radio and architectural levers -…

MmWave communications are expected to play a major role in the Fifth generation of mobile networks. They offer a potential multi-gigabit throughput and an ultra-low radio latency, but at the same time suffer from high isotropic pathloss,…

The millimeter wave frequencies (roughly above 10 GHz) offer the availability of massive bandwidth to greatly increase the capacity of fifth generation (5G) cellular wireless systems. However, to overcome the high isotropic pathloss at…

5th generation (5G) systems have been designed with three main objectives in mind: increasing throughput, reducing latency, and enabling reliable communications. To meet these (often conflicting) constraints, the 3GPP released a set of…

LTE-Licensed Assisted Access (LAA) networks are beginning to be deployed widely in major metropolitan areas in the US in the unlicensed 5 GHz bands, which have existing dense deployments of Wi-Fi as well. Various aspects of the coexistence…

Global allocations in the upper mid-band spectrum (4--24 GHz) necessitate a comprehensive exploration of the propagation behavior to meet the promise of coverage and capacity. This paper presents an extensive Urban Microcell (UMi) outdoor…

This paper proposes a cellular network exploiting millimeter-wave (mmWave) and ultra-densified base stations (BSs) to achieve the far-reaching 5G aim in downlink average rate. The mmWave overlaid network however incurs a pitfall that its…

With the severe spectrum shortage in conventional cellular bands, millimeter wave (mmW) frequencies between 30 and 300 GHz have been attracting growing attention as a possible candidate for next-generation micro- and picocellular wireless…

This paper provides an overview of the features of fifth generation (5G) wireless communication systems now being developed for use in the millimeter wave (mmWave) frequency bands. Early results and key concepts of 5G networks are…

Indoor environments present a significant challenge for wireless connectivity, as immense data demand strains traditional solutions. Public Mobile Network Operators (MNOs), utilizing outdoor macro base stations (BSs), suffer from poor…

Millimeter wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing…

Enhanced mobile broadband (eMBB) is one of the key use-cases for the development of the new standard 5G New Radio for the next generation of mobile wireless networks. Large-scale antenna arrays, a.k.a. Massive MIMO, the usage of carrier…

The IMT 2020 requirements of 20 Gbps peak data rate and 1 millisecond latency present significant engineering challenges for the design of 5G cellular systems. Use of the millimeter wave (mmWave) bands above 10 GHz --- where vast quantities…