相关论文: Effects of current limit for grid forming converte…
This work addresses the problem of transient stabilization of a power grid, following a destabilizing disturbance. The model considered is the cascade interconnection of seven New England test models with the disturbance (e.g., a powerline…
A unified virtual oscillator controller (uVOC) is proposed, which enables a unified analysis, design, and implementation framework for both grid-forming (GFM) and grid-following (GFL) voltage source converters (VSCs). Oscillator based GFM…
An increasing integration of photovoltaic units, electric vehicle chargers, heat pumps, and energy storage systems challenges low-voltage power grids and can cause voltage range violation, loss of stability, (local) overload of lines, and…
Having sufficient grid-forming sources is one of the necessary conditions to guarantee the stability in a power system hosting a very large share of inverter-based generation. The grid-forming function has been historically fulfilled by…
The stability of AC power grids relies on ancillary services that mitigate frequency fluctuations. The electromechanical inertia of large synchronous generators is currently the only resource to absorb frequency disturbances on sub-second…
Virtual oscillator control is the latest control technique for grid-forming inverters. Virtual Oscillator based Controllers (VOCs) provide all the steady-state droop functionalities of conventional droop controllers and, in addition, the…
With the increasing penetration of converter-interfaced distributed generation systems, it would be advantageous to specify local compliance criteria for these devices to ensure the small-signal stability of the interconnected system.…
In this article, a nonlinear strategy based on a flatness approach is used for controlling the instantaneous complex power supplied from the Point of Common Coupling (PCC) to a weak grid. To this end, the strategy introduced by the authors…
Grid-forming (GFM) inverter-based resources (IBRs) are capable of emulating the external characteristics of synchronous generators (SGs) through the careful design of the control loops. However, the current limiter in the control loops of…
The increase of current uniformity along of a resistive type superconductor fault current limiter (R-SFCL) in the design of this type of limiters is well perceived as an important issue. The non-uniform distribution of current in R-SFCL…
Grid-connected inverter control is challenging to implement due to the difficulty of obtaining and maintaining an accurate grid model. Direct Data-Driven Predictive Control provides a model-free alternative to traditional model-based…
The energy transition towards an increased supply of renewable energy raises concerns that existing electricity grids, built to connect few centralized large power plants with consumers, may become more difficult to control and stabilized…
Robust simulation is essential for reliable operation and planning of transmission and distribution power grids. At present, disparate methods exist for steady-state analysis of the transmission (power flow) and distribution power grid…
This paper proposes a nonlinear, adaptive controller to increase the stability margin of a direct-current (DC) small-scale electrical network containing a constant power load, whose value is unknown. Due to their negative incremental…
Modern power system is undergoing a paradigm shift from the synchronous generators-based system to the power electronics converters-dominated system. With the high penetration of converters, serious stability problems are provoked,…
Traditionally, inertia in power systems has been determined by considering all the rotating masses directly connected to the grid. During the last decade, the integration of renewable energy sources, mainly photovoltaic installations and…
Virtual Oscillator (VO) control is the latest and promising control technique for grid-forming and grid-supporting inverters. VO Controllers (VOCs) provide time-domain synchronization with a connected electrical network. At the same time, a…
Modern power systems face new operational hurdles due to the increasing adoption of inverter-coupled distributed energy resources, which impact system stability and control. Central to these challenges is the dynamic nature of grid…
In this paper, an actuator active fault-tolerant controller (FTC) is proposed for the voltage source converter (VSC) which interfaces a distributed energy resource (DER) to the power grid. The proposed active FTC includes two units:…
Due to the rise of distributed energy resources, the control of networks of grid-forming inverters is now a pressing issue for power system operation. Droop control is a popular control strategy in the literature for frequency control of…