相关论文: A Scalable 256-Elements E-Band Phased-Array Transc…

In this paper, a two-dimensional cylindrical Lens antenna based on the parallel plate technique is designed. It supports beam-steering capability of 58 degree at 28 GHz. The antenna is composed of low loss rectangular waveguide antennas,…

A novel movable-element simultaneously transmitting and reflecting surface (ME-STARS)-assisted near-field wideband communication framework is proposed. In particular, the position of each STARS element can be adjusted to combat the…

In this work, we theoretically propose a broadband asymmetric transmission (AT) device based on periodic Si nanoring arrays embedded in a SiO2 substrate. Results indicate that the device achieves a remarkable broadband AT effect in the…

Beamforming has great potential for joint communication and sensing (JCAS), which is becoming a demanding feature on many emerging platforms such as unmanned aerial vehicles and smart cars. Although beamforming has been extensively studied…

Future sixth-generation (6G) systems are expected to leverage extremely large-scale multiple-input multiple-output (XL-MIMO) technology, which significantly expands the range of the near-field region. The spherical wavefront characteristics…

Future wireless networks are envisioned to employ multiple-input multiple-output (MIMO) transmissions with large array sizes, and therefore, the adoption of complexity-scalable transceiver becomes important. In this paper, we propose a…

A cross slotted electronic band gap (EBG) with stacked rectangular patches shorted with a shorting pin is proposed in this paper. The study is being done on how the various parameters are varied by changing the probe feed location. The…

Fifth generation (5G) and beyond communication systems open the door to millimeter Wave (mmWave) frequency bands to leverage the extremely large operating bandwidths and deliver unprecedented network capacity. These frequency bands are…

This research study introduces a novel small antenna with wideband capacity for the higher frequency range. As a possible contender for 6G wireless networks, the proposed antenna is designed to target the 6G Millimeter-Wave (mmWave)…

This paper presents the study and the realization at IETR of a high data rate 60 GHz wireless communications system. The system uses a simple single carrier architecture. The receiver architecture is based on a differential demodulation…

This paper proposes a monostatic wideband system for integrated sensing and communication (ISAC) at millimeter-wave frequencies, based on multiple-input multiple-output (MIMO) orthogonal frequency-division multiplexing (OFDM). The system…

Large-scale multiple-input multiple-output (MIMO) holds great promise for the fifth-generation (5G) and future communication systems. In near-field scenarios, the spherical wavefront model is commonly utilized to accurately depict the…

In this paper, we studied the problem of beam alignment for millimeter wave (mmWave) communications, in which we assume a hybrid analog and digital beamforming structure is employed at the transmitter (i.e. base station), and an…

In this paper, we present a low overhead beam management approach for near-field millimeter-wave multi-antenna communication systems enabled by Reconfigurable Intelligent Surfaces (RISs). We devise a novel variable-width hierarchical…

We propose a thin, compact, broadband, polarization and angle insensitive metamaterial absorber based on a tungsten reflector, silicon spacer and a top pattern composed of a double square-like ring resonator utilizing nickel(Ni). In such a…

Extremely large-scale antenna array (ELAA) is a key candidate technology for the sixth generation (6G) mobile networks. Nevertheless, using substantial numbers of antennas to transmit high-frequency signals in ELAA systems significantly…

In this paper, we present an on-chip antenna at 290 GHz that achieves a maximum efficiency of 42\% on a low-resistivity silicon substrate for sub-terahertz integrated transceivers. The proposed antenna is based on a dual-slot structure to…

Slant-polarized Multi Input Multi Output (MIMO) antennas are able to improve the performance of mobile communication systems in terms of channel capacity. Especially, the implementation of MIMO configurations for automotive applications…

This paper presents designs and prototypes of low cost multiple input multiple output (MIMO) antennas for 5G and millimetre-wave (mm-wave) applications. The proposed MIMOs are fabricated using 3D printing and are able deliver beams in…

This paper proposes a wideband dual-polarized phased array with ultra-wideband scattering cross section (SCS) reduction. The antenna elements are loaded on a bilateral stepped ground. This ground is carefully designed in terms of height…