相关论文: A visual study on the spray of gas-liquid atomizer
The primary breakup of a planar liquid jet is explored via direct numerical simulation (DNS) of the incompressible Navier-Stokes equation with level-set and volume-of-fluid interface capturing methods. PDFs of the local radius of curvature…
A numerical investigation of flat fan sprays is conducted via Direct Numerical Simulations (DNS). Diverging liquid sheets are generated using tailored initial velocity profiles, where the opening angle serves as an explicit control…
An experimental investigation of secondary atomization of spray in plain-jet airblast atomizers with a circular array of six liquid jets is studied. Crossflow of air with controlled velocity and pressure is applied to transverse jets. The…
Standard photographs of streamer discharges show a two-dimensional projection. We here present stereo-photographic images that resolve their three-dimensional structure. We describe the stereoscopic set-up and evaluation, and we present…
In this article, the effect of geometrical parameters and flow conditions on the performance of a swirl atomizer is studied. Dimensional analysis and experimental investigations are utilized to define significant terms. The PDA system used…
Spray formation in ambient atmosphere from gas-centered swirl coaxial atomizers is described by carrying out experiments in a spray test facility. The atomizer discharges a circular air jet and an axisymmetric swirling water sheet from its…
Traditionally, circular orifices have been used for generating aerosols, however in recent times non-circular orifices are being considered due to their superior atomization and mixing features. In this work, we experimentally investigate…
Rotary atomization is used in a wide variety of fields, exploiting the external control option of the spray while no high-pressure fluid is needed. Most papers on rotary atomization deal with liquid jet breakup, while external spray…
In this article, we experimentally investigate the impact of a submillimetric water jet on a horizontal surface heated well above the "static" Leidenfrost temperature of water. We observe the transition from a regime where a single drop…
A thorough numerical, theoretical and experimental investigation of the liquid atomization in a full cone pressure swirl nozzle is presented. The first part is devoted to the study of the inner flow. CAD and CFD software are used in order…
The vaporization of a freely moving drop in a uniform, high-temperature gas stream is investigated through direct numerical simulation. The incompressible Navier-Stokes equations with surface tension and phase change are solved in…
Liquid atomization processes generating sprays and aerosols of droplets are used in many delivery and coating systems involving pure solvents, solutions, and suspensions. In our recent experimental work, we introduced a novel liquid…
The liquid cone-jet mode can be produced upon stimulation by a co-flowing gas sheath. Most applications deal with the jet breakup, leading to either of two droplet generation regimes: jetting and dripping. The cone-jet flow pattern is…
Spray drop size distribution generated by atomization of fuel influences several facets of a combustion process such as, fuel-air mixing, reaction kinetics and thrust generation. In a typical spray, the drop size distribution evolves…
Breakup of a liquid jet in a high speed gaseous crossflow finds wide range of engineering and technological applications, especially in the combustors of the gas turbine engines in aerospace industry. In this study, we present…
Direct Numerical Simulations of the injection of a pulsed round liquid jet in a stagnant gas are performed in a series of runs of geometrically progressing resolution. The Reynolds and Weber numbers and the density ratio are sufficiently…
To describe atomization completely it is necessary to track the liquid-gas interface morphology at any stage of the atomization process. Typically, instability analysis focuses on generic and simplified morphology: cylindrical jet, liquid…
The influence of the ambient pressure on the breakup process is investigated by means of PIV and shadowgraphy in the configuration of a planar prefilming airblast atomizer. The ambient pressure is varied from 1 to 8 bar. Other investigated…
The ambient gas pressure is determined for the onset of splashing of low-viscosity liquid drops on smooth dry surfaces as we change the control parameters: drop impact velocity, drop radius, viscosity, surface tension, density, and gas…
The impact of a liquid drop with high Reynolds and Weber numbers on a wet solid surface typically results in the emergence, rising, and expansion of a corona-like thin jet. This phenomenon is explained by the propagation of a kinematic…