相关论文: Substrate-Versatile Direct-Write Printing of Carbo…
Carbon Nanotubes (CNTs)-polymer composites are promising candidates for a myriad of applications. Ad-hoc CNTs-polymer composite fabrication techniques inherently pose roadblock to optimized processing resulting in microstructural defects…
Transfer printing methods are used to pattern and assemble monolithic carbon nanotube (CNT) thin-film transistors on large-area transparent, flexible substrates. Airbrushed CNT thin-films with sheet resistance 1kOhmsquare^{-1} at 80%…
Carbon nanotube fibers are materials with an exceptional combination of properties, including higher toughness than carbon fibers, electrical conductivity above metals, large specific surface area (250 $\frac{m^2}{g}$) and high…
Recent advances in nanotechnology have provided new materials which have the potential to surpass copper and aluminum alloys in electrical conductivity, weight and ampacity [2-6]. Among these carbon nanotubes (CNTs) stand out due to their…
Carbon nanotube (CNT) based electronic devices are promising for beyond-silicon solid-state electronics and vacuum micro-nano-electronics. Despite rapid progress in CNT field-effect transistor related solid-state electronics, the…
The normal paper used in any printer is among the cheapest flexible organic materials that exist. We demonstrate that we can print on paper high-frequency circuits tunable with an applied dc voltage. This is possible with the help of an ink…
Sensing technologies have been under research and development for their varied applications from microelectronics to space exploration. With the end of Moores law in sight, there is growing demand for shrinking materials and improving…
Advancements in fabrication methods have shaped new computing device technologies. Among these methods, depositing electrical contacts to the channel material is fundamental to device characterization. Novel layered and two-dimensional (2D)…
We perform systematic numerical simulations for carbon nanotube (CNT) film microstrip antennas to fabricate flexible and durable applications in terms of various device design parameters. The selection of appropriate materials for…
The advancements of nanomaterials or nanostructures have enabled the possibility of fabricating multifunctional materials that hold great promises in engineering applications. The carbon nanotube (CNT)-based nanostructure is one…
Controlled growth, patterning and placement of carbon nanotube (CNT) thin films for electronic applications are demonstrated. The density of CNT films is controlled by optimizing the feed gas composition as well as the concentration of…
Composites of direct-spun carbon nanotube (CNT) mats and epoxy are manufactured and tested in order to determine their mechanical and electrical properties. The mats are spun directly from a floating catalyst, chemical vapour deposition…
The atomistic simulations of carbon nanotube (CNT) - carbon reinforced composite material are reported. The studied composite samples were obtained by impregnating certain amounts of CNTs (3,3) and (6,6) into pristine graphite matrix. The…
High-performance single-wall carbon nanotube field-effect transistors (SWNT-FETs) are fabricated using directed assembly and mass-produced carbon nanotubes (CNTs). These FETs exhibit operating characteristics comparable to state-of-the-art…
The paper aims at the development of a digital twin modelling the electrical conductivity of multi-wall carbon nanotube (MWCNT)/polymer nanocomposite. A comparative analysis is conducted for various formulations of boundary conditions in…
High-performance solution-processed short-channel carbon nanotube (CNT) thin film transistors (TFTs) are fabricated using densely aligned arrays of metallic CNTs (m-CNTs) as source and drain electrodes, and aligned arrays of semiconducting…
As robotics advances toward integrating soft structures, anthropomorphic shapes, and complex tasks, soft and highly stretchable mechanotransducers are becoming essential. To reliably measure tactile and proprioceptive data while ensuring…
Carbon nanotube (CNT) fiber is formed by assembling millions of individual tubes. The assembly feature provides the fiber with rich interface structures and thus various ways of energy dissipation, as reflected by the non-zero loss tangent…
Transistors incorporating single-wall carbon nanotubes (CNTs) as the channel material are used in a variety of electronics applications. However, a competitive CNT-based technology requires the precise placement of CNTs at predefined…
In this work, we report on the fabrication of continuous transparent and flexible supercapacitors by depositing a CNT network onto a polymer electrolyte membrane directly from an aerogel of ultra-long CNTs produced floating in the gas…