相关论文: Correlation versus randomization of jerky flow in …
The influence of the surface pre-deformation on jerky flow caused by the Portevin-Le Chatelier (PLC) effect was investigated using flat tensile specimens of an Al-Mg alloy. Although jerky flow represents a macroscopic plastic instability,…
The collective behavior of dislocations in jerky flow is studied in Al-Mg polycrystalline samples subjected to constant strain rate tests. Complementary dynamical, statistical and multifractal analyses are carried out on the stress-time…
The complexity of the Portevin-Le Chatelier effect in Al-2.5%Mg polycrystalline samples subjected to uniaxial tensile tests is quantified. Multiscale entropy analysis is carried out on the stress time series data observed during jerky flow…
A characteristic feature of the Portevin - Le Chatelier effect or the jerky flow is the stick-slip nature of stress-strain curves which is believed to result from the negative strain rate dependence of the flow stress. The latter is assumed…
The plastic deformation of dilute alloys is often accompanied by plastic instabilities due to dynamic strain aging and dislocation interaction. The repeated breakaway of dislocations from and their recapture by solute atoms leads to stress…
Under plastic flow, multi-element high/medium-entropy alloys (HEAs/MEAs) commonly exhibit complex intermittent and collective dislocation dynamics owing to inherent lattice distortion and atomic-level chemical complexities. Using atomistic…
The scaling behavior of the Portevin-Le Chatelier (PLC) effect was studied by deforming Al-2.5%Mg alloy for a wide range of strain rates. To reveal the exact scaling nature, the time series data of true stress vs. time, obtained during…
The chapter presents the problem of the complexity of plastic flow in alloys, which is manifested by serrated deformation curves and transient plastic strain localizations. This phenomenon uncovers an inherently collective nature of the…
Longevity of materials, especially alloys, is crucial for enhancing the sustainability and efficiency of various applications, including gas turbines. Jerky flow, also known as dynamic strain aging effect, can indeed have a significant…
Scale invariant power law distributions for acoustic emission signals are ubiquitous to several plastically deforming materials. However, power law distributions for the acoustic emission energies are reported in distinctly different…
The Portevin-Le Chatelier(PLC) effect has been investigated by deforming Al-2.5%Mg alloy in the strain rate regime where simultaneously two types (type B and type A) of serrations appear in the stress strain curve. Our analysis reveal that…
The plastic deformation of metal alloys localizes in the Portevin--Le Chatelier effect in bands of different types, including propagating, or type 'A' bands, usually characterised by their width and a typical propagation velocity. This…
Recent observations of jerky flow in high-entropy alloys (HEA) revealed a high role of self-organization of dislocations in their plasticity. The present work reports first results of investigation of stress fluctuations during plastic…
This chapter presents a literature review of the serrated flow phenomenon in high-entropy alloys (HEAs). The serrated flow is important as it can result in permanent macroscopic and microstructural changes in HEAs. The literature reveals…
We report results of statistical and dynamic analysis of the serrated stress-time curves obtained from compressive constant strain-rate tests on two metallic glass samples with different ductility levels in an effort to extract hidden…
The interaction between edge dislocations and Guinier-Preston zones in an Al-Cu alloy was analyzed by means of atomistic simulations. The different thermodynamic functions that determine the features of these obstacles for the dislocation…
The scaling behavior of the Portevin-Le Chatelier (PLC) effect is studied by deforming a substitutional alloy, Al-2.5%Mg and an interstitial alloy, low carbon steel (0.15%C, 0.33%Mn, 0.04%P, 0.05%S, 0.15%Si and rest Iron) at room…
Disordered solids respond to quasistatic shear with intermittent avalanches of plastic activity, an example of the crackling noise observed in many nonequilibrium critical systems. The temporal power spectrum of activity within disordered…
Tensile tests were carried out by deforming polycrystalline samples of Al-2.5%Mg alloy at four different temperatures in an intermediate strain rate regime of 2x10-4s-1 to 2x10-3s-1. The Portevin-Le Chatelier (PLC) effect was observed…
The slow flow of amorphous solids exhibits striking heterogeneities: swift localised particle rearrangements take place in the midst of a more or less homogeneously deforming medium. Recently, experimental as well as numerical work has…