相关论文: Investigations into the opening of fractures durin…
Displacement flows are common in hydraulic fracturing, as fracking fluids of different composition are injected sequentially in the fracture. The injection of an immiscible fluid at the center of a liquid-filled fracture results in the…
Fluid-induced slip of fractures is characterized by strong multiphysics couplings. Three physical processes are considered: Flow, rock deformation and fracture deformation. The fractures are represented as lower-dimensional objects embedded…
We present a complete numerical analysis for a general discretization of a coupled flow-mechanics model in fractured porous media, considering single-phase flows and including frictionless contact at matrix-fracture interfaces, as well as…
It is usually assumed that hydraulic fracture has two symmetrical wings with respect to the fluid injection point. Hence, authors limit themselves to modelling of one half of the fracture. In our work we demonstrate that the case of a…
The purpose of this study is to investigate morphology of simultaneously propagating hydraulic fractures. Simultaneous propagation of hydraulic fractures occurs during stimulation of horizontal wells, and, in particular, several initiation…
Fluid flow in rough fractures and the coupling with the mechanical behaviour of the fractures pose great difficulties for numerical modeling approaches, due to complex fracture surface topographies, the non-linearity of hydromechanical…
We consider a two dimensional lattice model to describe the opening of a crack in hydraulic fracturing. In particular we consider that the material only breaks under tension and the fluid has no pressure drop inside the crack. For the case…
Modeling important engineering problems related to flow-induced damage (in the context of hydraulic fracturing among others) depends critically on characterizing the interaction of porous media and interstitial fluid flow. This work…
Hydro-mechanical processes in rough fractures are highly non-linear and govern productivity and associated risks in a wide range of reservoir engineering problems. To enable high-resolution simulations of hydro-mechanical processes in…
Non-Newtonian rheology is widely acknowledged in subsurface fluids, yet its presence and effects are largely ignored in current fracture-flow studies. Here, we simulate fracture flow of non-Newtonian polymer solutions on a several…
During hydraulic fracturing, the injection of a pressurized fluid in a brittle elastic medium leads to the formation and growth of fluid-filled fractures. A disc-like or penny-shaped fracture grows radially from a point source during the…
Fractures are ubiquitous in the subsurface. The flow and mechanical properties of these fractures are controlled by its compliance or stiffness. Characterizing fracture compliance and conductivity is crucial in applications such as fault…
We present a model of the hydraulic fracturing of heterogeneous poroelastic media. The formalism is an effective continuum model that captures the coupled dynamics of the fluid pressure and the fractured rock matrix and models both the…
Understanding the controlling mechanisms underlying injection-induced seismicity is important for optimizing reservoir productivity and addressing seismicity-related concerns related to hydraulic stimulation in Enhanced Geothermal Systems.…
Simulating the flow of two fluid phases in porous media is a challenging task, especially when fractures are included in the simulation. Fractures may have highly heterogeneous properties compared to the surrounding rock matrix,…
We present a hybrid-mixed finite element method for a novel hybrid-dimensional model of single-phase Darcy flow in a fractured porous media. In this model, the fracture is treated as an $(d-1)$-dimensional interface within the…
The paper presents a numerical method for simulating flow and mechanics in fractured rock. The governing equations that couple the effects in the rock mass and in the fractures are obtained using the discrete fracture-matrix approach. The…
Recent years have seen a significant interest in using phase field approaches to model hydraulic fracture, so as to optimise a process that is key to industries such as petroleum engineering, mining and geothermal energy extraction. Here,…
Many geo-engineering applications, e.g., enhanced geothermal systems, rely on hydraulic fracturing to enhance the permeability of natural formations and allow for sufficient fluid circulation. Over the past few decades, the phase-field…
Fluid injection and production cause changes in reservoir pressure, which result in deformations in the subsurface. This phenomenon is particularly important in reservoirs with abundant fractures and faults because the induced slip and…