相关论文: Gigabit Ethernet Daisy-Chain on FPGA for COMET Rea…

The Wireless Allowing Data and Power Transmission (WADAPT) proposal was formed to study the feasibility of wireless technologies in HEP experiments. A strong motivation for using wireless data transmission at the ATLAS detector is the…

The TRB hardware module is a multi-purpose Trigger and Readout Board with on-board DAQ functionality developed for the upgrade of the HADES experiment. It contains a single computer chip (Etrax) running Linux as a well as a 100 Mbit/s…

The tRopIcal DEep-sea Neutrino Telescope (TRIDENT) is a future large-scale next-generation neutrino telescope. In September 2021, the TRIDENT pathfinder experiment (TRIDENT EXplorer, T-REX for short) completed in-situ measurements of…

The CONCERTO millimeter-wave spectral-imaging instrument was deployed on the Atacama Pathfinder EXperiment (APEX), where it acquired science data between April 2021 and May 2023. The instrument features two focal-plane arrays, each composed…

Radio transient discovery using next generation radio telescopes will pose several digital signal processing and data transfer challenges, requiring specialized high-performance backends. Several accelerator technologies are being…

Current, state-of-the-art CCDs are close to being able to deliver all key performance figures for future strategic X-ray missions except for the required frame rates. Our Stanford group is seeking to close this technology gap through a…

In this paper, we present a complete Data Acquisition System (DAQ) together with the readout mechanisms for the J-PET tomography scanner. In general detector readout chain is constructed out of Front-End Electronics (FEE), measurement…

For some cavity-quantum-electrodynamics systems, such as a single electron spin coupled to a passive cavity, it is challenging to reach the strong-coupling regime. In such a weak-coupling regime, the conventional dispersive readout…

The PCIe400 is a generic readout board designed for high-throughput data acquisition in future high-energy physics experiments. It interfaces up to 48 bidirectional links supporting custom protocols from 1 to 26 Gbps to modern back-end…

Modern container-based microservices evolve through rapid deployment cycles, but CI/CD pipelines still rarely measure energy consumption, even though prior work shows that design patterns, code smells and refactorings affect energy…

A cylindrical GEM tracker is under construction in order to replace and improve the inner tracking system of the BESIII experiment. Tests with planar chamber prototypes were carried out on the H4 beam line of SPS (CERN) with muons of 150…

The amount of data produced by highly granular silicon tracking detectors in high energy physics experiments poses a major challenge to readout systems. At high collision rates, e.g. at LHC experiments, only a small fraction of data can be…

Wireless sensor networks are deployed in many monitoring applications but still suffer from short lifetimes originating from limited energy sources and storages. Due to their low-power consumption and their on-demand communication ability,…

A spiral fiber tracker (SFT) has been designed and produced for the J-PARC E36 experiment as an element of the tracking system for conducting a high-resolution momentum measurement of charge particles from kaon decays. A novel technique to…

Energy efficiency has become an increasingly important concern in computer architecture due to the end of Dennard scaling. Heterogeneity has been explored as a way to achieve better energy efficiency and heterogeneous microarchitecture…

In this paper, we design a PXI-based, multi-channel data-acquisition system (DAS) mainly applicable to recording one-shot fast transient pulses in nuclear physics experiments. The system consists of one NI PXIe-1085 chassis, containing a…

A GEM tracking detector with an extended drift region has been studied as part of an effort to develop new tracking detectors for future experiments at RHIC and for the Electron Ion Collider that is being planned for BNL or JLAB. The…

Direct-attached accelerators, where application accelerators are directly connected to the datacenter network via a hardware network stack, offer substantial benefits in terms of reduced latency, CPU overhead, and energy use. However, a key…

As enterprises move to a cloud-first approach, their network becomes crucial to their daily operations and has to be continuously monitored. Although passive monitoring can be convenient from a deployment viewpoint, inferring the state of…

This paper presents a comprehensive study on enhancing kiosk systems through a low-code architecture, with a focus on AI-based implementations. Modern kiosk systems are confronted with significant challenges, including a lack of…