相关论文: Making large overhangs in micrometer and nanometer…
Dielectric metasurfaces that combine high-index materials with optical nonlinearities are widely recognized for their potential in various quantum and classical nanophotonic applications. However, the fabrication of high-quality…
In submerged sandy slopes, soil is frequently eroded as a combination of two main mechanisms: breaching, which refers to the retrogressive failure of a steep slope forming a turbidity current, and, instantaneous sliding wedges, known as…
A systematic review, covering fabrication of nanoscale patterns by laser interference lithography (LIL) and their applications for optical devices are provided. LIL is a patterning method with simple, quick process over a large area without…
Micro end-milling method is a universal micro manufacturing method, which can be used to fabricating complex 3D structures and parts with many materials. But compared with their micrometer order size, their surface roughness quality is not…
Pulsed-laser dry printing of noble-metal microrings with a tunable internal porous structure, which can be revealed via an ion-beam etching post-procedure, was demonstrated. Abundance and average size of the pores inside the microrings were…
Homogenization is a technique for the analysis of complex materials by replacing them with equivalent homogeneous materials that exhibit similar properties. By constructing a three-dimensional (3D) porous material model and employing…
The purpose of this work is two-fold. First, we introduce an efficient homogenization-based approach to perform topology optimization of coated structures with orthotropic infill material. By making use of the relaxed design space, we can…
Metal-assisted chemical etching of silicon is a promising method for fabricating nanostructures with a high aspect ratio. To define a pattern for the catalyst, lift-off processes are commonly used. The lift-off step however is often a…
Inertial fluid flow deformation around pillars in a microchannel is a new method for controlling fluid flow. Sequences of pillars have been shown to produce a rich phase space with a wide variety of flow transformations. Previous work has…
Materials designed by nature commonly exhibit functional grading and laminated structures, particularly when intended for enhanced impact protection. Synthetic materials have also found success in exploiting this concept with fully dense…
In this paper, we present a unit cell showing a band-gap in the lower acoustic domain. The corresponding metamaterial is made up of a periodic arrangement of this unit cell. We rigorously show that the relaxed micromorphic model can be used…
Fabrication of sub-micron Josephson junctions is demonstrated using standard processing techniques for high-coherence, superconducting qubits. These junctions are made in two separate lithography steps with normal-angle evaporation. Most…
Introducing hierarchical pore structure to microporous materials such as metal-organic frameworks (MOFs) can be beneficial for reactions where the rate of reaction is limited by low rates of diffusion or high pressure drop. This…
We have demonstrated a versatile method for fabrication of biaxial hyperbolic metamaterials (HMMs) using layered structures consisting of titanium dioxide and copper. In order to enable the biaxial property, an oblique angle deposition…
Direct near field electrospinning is used to produce very long helical polystyrene microfibers in water. The pitch length of helices can be controlled by changing the applied voltage, allowing to produce both micro springs and…
Research on silicon nitride (SiN) nanomechanical resonators produces an exceptionally rich variety of resonator geometries, for which there is currently no available rapid prototyping solution. Experimental advances in nanobeam, trampoline,…
Droplet deposition onto a hydrophobic surface is studied experimentally and numerically. A wide range of droplet sizes can result from the same syringe, depending strongly on the needle retraction speed. Three regimes are identified…
Owing to additive manufacturing techniques, a structure at millimeter length scale (macroscale) can be produced by using a lattice substructure at micrometer length scale (microscale). Such a system is called a metamaterial at the…
Oblique angle deposition (OAD) is a nanostructuration method widely used to tune the optical properties of thin films. The introduction of porosity controlled by the deposition angle is used to develop the architecture of each layer and…
Many materials contain extended defects of nanosize scale, such as dislocations, cracks, pores, polymorphic inclusions, and other embryos of competing phases. When one is interested not in the precise internal structure of a sample with…