相关论文: Preparation of the AlTiNiCuCox system high-entropy…

In the first part of this article, I briefly review early research activities concerning strongly correlated electron systems, beginning with the discovery of superconductivity and the first observation of a resistance minimum in nominally…

The precipitation microstructure of the \gamma' (AlAg2) intermetallic phase has been examined in aluminium-silver-copper alloys. The microstructure developed in an Al-0.90at.%Ag-0.90at.%Cu alloy was significantly different from that…

We have used density functional theory to study the structural stability of surface alloys. Our systems consist of a single pseudomorphic layer of $M_xN_{1-x}$ on the Ru(0001) surface, where $M$ = Fe or Co, and $N$ = Pt, Au, Ag, Cd, or Pb.…

Using Density Functional Theory (DFT) calculations and Monte-Carlo (MC) simulations, we investigate the recently reported magnetic transition in B2 Al-Cr-Co alloys. The Cr sublattice is alloyed with different amounts of Co in the…

Distinct shortcomings of individual halide perovskites for solar applications, such as restricted range of band gaps, propensity of ABX3 to decompose into AX+BX2, or oxidation of 2ABX3 into A2BX6 have led to the need to consider alloys of…

In 2006, a novel cobalt-based superalloy was discovered [1] with mechanical properties better than some conventional nickel-based superalloys. As with conventional superalloys, its high performance arises from the precipitate-hardening…

(Al,Cr)2O3 coatings with Al/(Al+Cr) = 0.5 or Al = 70 at.%, doped with 0, 5 or 10 at.% Si, were deposited on hard metal and Si(100) substrates to elucidate the influence of Si on the resulting coatings. The chemical analysis of the coatings…

Aluminium alloy AA7075 (Al-Zn-Mg-Cu) specimens were prepared using selective laser melting, also known as powder bed fusion additive manufacturing. In the as-manufactured state, which represents a locally rapidly solidified condition, the…

The electrical resistivity and the anisotropic magnetoresistance (AMR) was investigated for Ni Co alloys at and below room temperature. The Ni Co alloy layers having a thickness of about 2 um were prepared by electrodeposition on Si wafers…

Solidification is an important process in many alloy processing routes. The solidified microstructure of alloys is usually made up of dendrites, eutectics or a combination of both. The evolving morphologies are largely determined by the…

We describe a novel mechanism for the synthesis of a stable high-entropy alloy powder from an otherwise immiscible Mg-Ti rich metallic mixture by employing high-energy mechanical milling. The presented methodology expedites the synthesis of…

Initial powder mixtures of Cu, Fe and Co are exposed to severe plastic deformation by high-pressure torsion to prepare solid solutions. A broad range of compositions is investigated, whereas this study aims at the synthesis of soft magnetic…

Investigation of crystallization in an 5BDSR amorphous alloy by system Fe-Cu-Nb-Si-B under the influence of an incoherent optical radiation generated by gas discharge flash-lamp using X-ray diffraction scattering. It is shown that depending…

The structural and magnetic properties of Fe$_{1-x}$Ni$_x$~($x$ = 0.32, 0.36, 0.40, 0.50) alloys have been investigated using synchrotron based x-ray diffraction (XRD) technique with x-rays of wavelength 0.63658 \AA\ down to 50 K…

In this study, a series of nanocrystalline ferrites of Ni0.7Cu0.30AlxFe2-xO4 (x=0.00 to 0.10 with a step of 0.02) has been synthesized through the sol-gel auto combustion technique. The structural, morphological, dielectric, and electrical…

The alloying effect on the lattice parameters, isostructural mixing enthalpies and ductility of the ternary nitride systems Cr1-xTMxN (TM=Sc, Y; Ti, Zr, Hf; V, Nb, Ta; Mo, W) in the cubic B1 structure has been investigated using…

What determines precipitate morphologies in co-precipitating alloy systems? We focus on alloys of two precipitating phases, with precipitates of the fast-precipitating phase acting as heterogeneous nucleation sites for a second phase…

High-temperature superconductivity occurs as copper oxides are chemically tuned to have a carrier concentration intermediate between their metallic state at high doping and their insulating state at zero doping. The underlying evolution of…

The effects of Co addition on the chemical and electronic structure of PbTiO$_3$ were explored both by theory and through experiment. Cobalt was incorporated to PbTiO$_3$ during sol gel process. The XRD data of the compounds confirmed the…

In this paper, the effects of Al, Nb main elements, Fe, Mo, W, Co, B, Si and their contents on the fluidity of Ti-22Al-25Nb alloy were investigated. The composition that was beneficial to improve the fluidity was screened through the…