相关论文: Electrical properties of thermal oxide scales on p…
Understanding corrosion in liquid metal-cooled nuclear systems is essential in order be able to control it. While much literature exists detailing corrosion rates and mechanisms of structural materials in liquid metals, much still remains…
Measurements of resistance vs. temperature have been carried out on a sequence of quench-condensed ultrathin films of amorphous bismuth (a-Bi). The resistance below about 0.1K was found to be temperature independent in a range of films with…
This work addresses the early stages ($\le$1000 h) of the dissolution corrosion behavior of 316L and DIN 1.4970 austenitic stainless steels in contact with oxygen-poor (C$_O$ < 10$^-$$^8$ mass%), static liquid lead-bismuth eutectic (LBE) at…
The thermophysical properties of oxide scale, in the general case, are affected by the variation of the temperature of phase transitions (either magnetic or polymorphic) in its components due to impurities, lattice defects, grain sizes,…
It is essential to control the dissolution rate of iron oxide particles for a prospective acidic iron electrowinning process. In this study, the combined influence of temperature (40-80{\deg}C) and short-wavelength light exposure on the…
A metal-oxide film can be used as a hydrogen-isotope permeation barrier in the fuel circulation system for nuclear fusion. We fabricated Er$_2$O$_3$ thin film on a type 316L stainless-steel substrate by using a metal-organic chemical vapor…
Oxide scale formed on the surface of steel products during high-teperature processes is studied as a composite material, the main solid components of which, in general, are wustite, magnetite, hematite and metallic iron. To estimate the…
Clarifying the electronic and magnetic properties of lutetium, lutetium dihydride, and lutetium oxide is very helpful to understand the emergent phenomena in lutetium-based compounds (such as room-temperature superconductivity). However,…
Electroplated Bismuth (Bi) is commonly used in Transition-Edge Sensors (TESs) for X-rays because of its high stopping power and low heat capacity. Electroplated Bi is usually grown on top of another metal that acts as seed layer, typically…
Atomic layer deposition (ALD) provides uniform and conformal thin films that are of interest for a range of applications. To better understand the properties of amorphous ALD films, we need improved understanding of their local atomic…
AlN thin films have been grown on Si (100) substrates by reactive ion beam sputter deposition (IBSD) at different substrate temperatures varying from room temperature (RT) to 500oC. Substrate temperature induced microstructural transition…
This study investigates the temperature-induced hysteretic behavior of resistivity and magnetoresistance in electrodeposited bismuth films, with a focus on their application as absorbers in transition-edge sensors (TESs) for X-ray…
The growth of atomically-flat thin films of ferroelectric PbTiO3 on SrTiO3 substrates, using molecular beam epitaxy, is reported. The main issue in the growth of these materials is the high volatility of lead. This can be largely overcome…
The data of different authors on the thermal conductivity of wustite Fe1-xO, magnetite F3O4, hematite Fe2O3 and pure iron are systematized. The generalized values are described by piecewise smooth functions containing as varying parameters…
Thermoelectric (TE) materials achieve localised conversion between thermal and electric energies, and the conversion efficiency is determined by a figure of merit zT. Up to date, two-dimensional electron gas (2DEG) related TE materials hold…
The temperature dependence of optical constants of titanium nitride thin film is investigated using spectroscopic ellipsometry between 1.4 to 5 eV in the temperature range 300 K to 650 K in steps of 50 K. The real and imaginary parts of the…
T91 samples were exposed to static liquid lead-bismuth eutectic (LBE) at 700{\deg}C for 250-500 hours in either an oxidising or reducing environment. Corrosion damage was characterised using electron microscopy techniques, which identified…
Post deposition variation in film resistance of Sb2Te3 films deposited on glass substrates at room temperature and an elevated temperature (110oC) are investigated. The resistance of films grown at room temperature shows a non-linear…
Thermoelectric (TE) materials research plays a vital role in heat-to-electrical energy conversion and refrigeration applications. Bismuth-antimony (Bi-Sb) alloy is a promising material for thermoelectric cooling. Herein, a high figure of…
First principle calculations are performed to investigate the effect of polar order strength on the thermoelectric (TE) properties of GeTe alloy in its rhombohedral structure. The variation in the polarization state using various…