相关论文: A Family of Constitutive Models Implemented in PLA…
A finite-strain formulation is developed, implemented and tested for a constitutive model capable of describing the transition from granular to fully dense state during cold forming of ceramic powder. This constitutive model (as well as…
The present contribution proposes a general constitutive model to simulate the orthotropic stiffness, pre-peak nonlinearity, failure envelopes, and the post-peak softening and fracture of textile composites. Following the microplane model…
Shape Memory Alloys (SMAs) has been widely aware of working as actuators for active/smart morphing structures in the engineering industry. Because of the high actuation energy density of SMAs, compared to other active materials, structures…
A constitutive model based on the combination of damage mechanics and plasticity is developed to analyse concrete structures subjected to dynamic loading. The aim is to obtain a model, which requires input parameters with clear physical…
The theory of evolving natural configurations is an effective technique to model dissipative processes. In this paper, we use this theory to revisit nonlinear constitutive models of viscoelastic solids. Particularly, a Maxwell and a…
Classically, the mechanical response of materials is described through constitutive models, often in the form of constrained ordinary differential equations. These models have a very limited number of parameters, yet, they are extremely…
The mechanical response of amorphous silica (or silica glass) under hydrostatic compression for very high pressures up to 25 GPa is modelled via an elastic-plastic constitutive equation (continuum mechanics framework).The material…
A constitutive model based on the combination of damage mechanics and plasticity is developed to analyse the failure of concrete structures. The aim is to obtain a model, which describes the important characteristics of the failure process…
We propose a data-driven constitutive framework for anisotropic damage mechanics based on the second-order damage tensor approach for both compressible and incompressible materials. The formulation is thermodynamically consistent and…
In this paper, we study the preferential stiffness and the crack-tip fields for an elastic porous solid of which material properties are dependent upon the density. Such a description is necessary to describe the failure that can be caused…
We consider a linearly elastic composite medium, which consists of a homogeneous matrix containing a statistically homogeneous set of multimodal spherical inclusions modeling the morphology of heterogeneous solid propellants (HSP).…
The objective of this work is to assess computationally efficient coarse-grained plasticity models against high-fidelity crystal plasticity simulations for magnesium polycrystals over a wide range of textures and grain sizes. A basic…
An elasto-plastic model for concrete, based on a recently-proposed yield surface and simple hardening laws, is formulated, implemented, numerically tested and validated against available test results. The yield surface is smooth and…
The quasistatic behavior of a simple 2D model of a cohesive powder under isotropic loads is investigated by Discrete Element simulations. The loose packing states, as studied in a previous paper, undergo important structural changes under…
This article proposes a coupled thermomechanical finite element model tailored to the macroscale simulation of metal additive manufacturing processes such as selective laser melting. A first focus lies on the derivation of a consistent…
Constitutive modelling of the stress-strain response of rubbery polymers is described, with an emphasis on the limits to linearity for both neat and filled rubber (the latter due to the Payne effect). Deviations from the Boltzmann…
A three-dimensional mesoscopic viscoplasticity model for simulating rate-dependent plasticity and creep in unidirectional thermoplastic composites is presented. The constitutive model is a transversely isotropic extension of an isotropic…
Purpose: The purpose of this work is to apply a recently proposed constitutive model for mechanically induced martensitic transformations to the prediction of transformation loci. Additionally, this study aims to elucidate if a…
Many engineering applications of Shape Memory Alloys (SMAs) involve passing back and forth through phase transformation many times. Repeated phase transformation develops permanent deformations originating from the significant distortion…
In the present work, two machine learning based constitutive models for finite deformations are proposed. Using input convex neural networks, the models are hyperelastic, anisotropic and fulfill the polyconvexity condition, which implies…