相关论文: Mechanical dissipation below 1$\mu$Hz with a cryog…
Monitoring motion originating from ultra low-temperature cooling systems like cryocoolers is important for vibration sensitive cryogenic experiments like KAGRA. Since no commercial cryogenic accelerometers are available, we developed a…
We report on the development of an induction based low temperature high frequency ac susceptometer capable of measuring at frequencies up to 3.5 MHz and at temperatures between 2 K and 300 K. Careful balancing of the detection coils and…
Low-temperature scanning probe microscopes (SPMs) are critical for the study of quantum materials and quantum information science. Due to the rising costs of helium, cryogen-free cryostats have become increasingly desirable. However, they…
We report on the design, fabrication, and implementation of ultrasensitive micromechanical oscillators. Our ultrathin single-crystal silicon cantilevers with integrated magnetic structures are the first of their kind: They are fabricated…
We present the measurement of squeezed light generation using an engineered optomechanical system fabricated from a silicon microchip and composed of a micromechanical resonator coupled to a nanophotonic cavity. Laser light is used to…
We report on experiments performed at low temperatures on aluminum covered silicon nanoelectromechanical resonators. The substantial difference observed between the mechanical dissipation in the normal and superconducting states measured…
The rapid development of micro- and nanooscillators in the past decade has led to the emergence of novel sensors that are opening new frontiers in both applied and fundamental science. The potential of these novel devices is, however,…
We demonstrate successful operation of a continuous flow liquid helium magnetic cryostat (Oxford Instruments, Microstat MO) in closed cycle operation using a modular cryocooling system (ColdEdge Technologies, Stinger). For the system…
Recently it was discovered that torsion modes of strained nanoribbons exhibit dissipation dilution, giving a route to enhanced torque sensing and quantum optomechanics experiments. As with all strained nanomechanical resonators, an…
A system providing an optical frequency with an instability comparable to that of a hydrogen maser is presented. It consists of a $5$ $\mathrm{cm}$ long, vertically oriented silicon optical resonator operated at temperatures between $1.5$…
We show how charged levitated nano- and micro-particles can be cooled by interfacing them with an $RLC$ circuit. All-electrical levitation and cooling is applicable to a wide range of particle sizes and materials, and will enable…
Laser cooling is a fundamental technique used in primary atomic frequency standards, quantum computers, quantum condensed matter physics and tests of fundamental physics, among other areas. It has been known since the early 1990s that laser…
We determine the magnetic susceptibility of thermal QCD matter by means of first principles lattice simulations using staggered quarks with physical masses. A novel method is employed that only requires simulations at zero background field,…
Thermal noise of a mirror can be reduced by cold damping. The displacement is measured with a high-finesse cavity and controlled with the radiation pressure of a modulated light beam. We establish the general quantum limits of noise in cold…
We demonstrate significant cooling of electrons in a nanostructure below 10 mK by demagnetisation of thin-film copper on a silicon chip. Our approach overcomes the typical bottleneck of weak electron-phonon scattering by coupling the…
An enduring challenge in constructing mechanical oscillator-based hybrid quantum systems is to ensure engineered coupling to an auxiliary degree of freedom while maintaining good mechanical isolation from the environment, that is, low…
We report the design-technology co-optimization (DTCO) scheme to develop a 28-nm cryogenic CMOS (Cryo-CMOS) technology for high-performance computing (HPC). The precise adjustment of halo implants manages to compensate the threshold voltage…
Nuclear spin-lattice relaxation times are measured on copper using magnetic resonance force microscopy performed at temperatures down to 42 mK. The low temperature is verified by comparison with the Korringa relation. Measuring spin-lattice…
We report the results of measurements of the dc-susceptibility and the 23Na-NMR response of Na2V2O7, a recently synthesized, non metallic low dimensional spin system. Our results indicate that upon reducing the temperature to below 100 K,…
Mechanical resonances are used in a wide variety of devices; from smart phone accelerometers to computer clocks and from wireless communication filters to atomic force microscope sensors. Frequency stability, a critical performance metric,…