相关论文: Reducing Scattered Light in LIGO's Third Observing…
Scattered light is one of the most common sources of noise in the LIGO gravitational wave detectors. Light scattering is a highly non-linear process through which motion at low frequencies gets up-converted and creates noise in a higher…
The sensitivity of aLIGO detectors is adversely affected by the presence of noise caused by light scattering. Low frequency seismic disturbances can create higher frequency scattering noise adversely impacting the frequency band in which we…
Data acquired by the Virgo interferometer during the second part of the O3 scientific run, referred to as O3b, were analysed with the aim of characterising the onset and time evolution of scattered light noise in connection with the…
Scattered light noise affects the sensitivity of gravitational waves detectors. The characterization of such noise is needed to mitigate it. The time-varying filter empirical mode decomposition algorithm is suitable for identifying signals…
Environmental seismic disturbances limit the sensitivity of LIGO gravitational wave detectors. Trains near the LIGO Livingston detector produce low frequency (0.5-10 Hz) ground noise that couples into the gravitational wave sensitive…
The sensitivity of the Advanced LIGO detectors to gravitational waves can be affected by environmental disturbances external to the detectors themselves. Since the transition from the former initial LIGO phase, many improvements have been…
Data from ground-based gravitational-wave detectors contains numerous short-duration instrumental artifacts, called "glitches." The high rate of these artifacts in turn results in a significant fraction of gravitational-wave signals from…
Scattered light is one of the most common sources of non-stationary noise at low frequencies in Advanced LIGO detectors. It appears as arch-like features in time-frequency spectrograms, produced when stray light reflects from moving…
We present a method to identify and categorize gravitational wave candidate triggers identified by matched filtering gravitational wave searches (pipelines) caused by transient noise (glitches) in gravitational wave detectors using Support…
Advanced gravitational-wave detector designs are pushing towards lower frequencies, where certain types of noise, previously considered negligible, may come to dominate the detectors' noise budgets. In particular, we revisit atmospheric…
The LIGO observatories detect gravitational waves through monitoring changes in the detectors' length down to below $10^{-19}$\,$m/\sqrt{Hz}$ variation---a small fraction of the size of the atoms that make up the detector. To achieve this…
Data recorded by gravitational wave detectors includes many non-astrophysical transient noise bursts, the most common of which is caused by scattered-light within the detectors. These so-called ``glitches'' in the data impact the ability to…
Excess noise from scattered light poses a persistent challenge in the analysis of data from gravitational wave detectors such as LIGO. We integrate a physically motivated model for the behavior of these "glitches" into a standard Bayesian…
Progress in gravitational-wave astronomy depends upon having sensitive detectors with good data quality. Since the end of the LIGO-Virgo-KAGRA third Observing run in March 2020, detector-characterization efforts have lead to increased…
The observation of gravitational waves is hindered by the presence of transient noise (glitches). We study data from the third observing run of the Advanced LIGO detectors, and identify new glitch classes. Using training sets assembled by…
An important goal for LIGO (the Laser Interferometer Gravitational-Wave Observatory) and Virgo is to find periodic sources of gravitational waves. The LIGO and Virgo detectors are sensitive to a variety of noise of non-astrophysical origin,…
Understanding the noise in gravitational-wave detectors is central to detecting and interpreting gravitational-wave signals. Glitches are transient, non-Gaussian noise features that can have a range of environmental and instrumental…
Pulsars are spinning neutron stars which emit an electromagnetic beam. We expect pulsars to slowly decrease their rotational frequency. However, sudden increases of the rotational frequency have been observed from different pulsars. These…
We present a method to characterize the noise in ground-based gravitational-wave observatories such as the Laser Gravitational-Wave Observatory (LIGO). This method uses linear regression algorithms such as the least absolute shrinkage and…
On April 1st, 2019, the Advanced Laser Interferometer Gravitational-Wave Observatory (aLIGO), joined by the Advanced Virgo detector, began the third observing run, a year-long dedicated search for gravitational radiation. The LIGO detectors…