相关论文: Microstructure of the near-wall layer of filtratio…
We report on a microfluidic method that allows measurement of a small concentration of large contaminants in suspensions of solid micrometer-scale particles. To perform the measurement, we flow the colloidal suspension through a series of…
The macroscopic phenomenon of filtration is the separation between suspended and liquid phases and it takes place in natural environments (e.g. groundwater, soil, hyporheic zone) and industrial systems (e.g. filtration plants,…
Accumulation of particles while flowing past constrictions is a ubiquitous phenomenon observed in diverse systems. Some of the common examples are jamming of salt crystals near the orifice of salt shakers, clogging of filter systems,…
The kinetics of phase transition processes often governs the resulting material microstruc-ture. Using optical microscopy, we here investigate the formation and stabilization of a po-rous crystalline microstructure forming in low-salt…
Clogging is a common obstacle encountered during the transport of suspensions and represents a significant energy and material cost across applications, including water purification, irrigation, biopharmaceutical processing, and aquifer…
We study a reaction-diffusion model posed on two distinct spatial scales that accounts for diffusion, aggregation, fragmentation, and deposition of populations of colloidal particles within a porous material. In this model, the macroscopic…
Bioclogging, the clogging of pores with living particles, is a complex process that involves various coupled mechanisms such as hydrodynamics and particle properties. This article explores bioclogging at the microscale level. At this scale,…
We explore the influence of particle softness and internal structure on both the bulk and interfacial rheological properties of colloidal suspensions. We probe bulk stresses by conventional rheology, by measuring the flow curves, shear…
Deposition of particles while flowing past constrictions is a ubiquitous phenomenon observed in diverse systems. Some common examples are jamming of salt crystals near the orifice of saltshakers, clogging of filter systems, gridlock in…
The flow of a charged-stabilized suspension through a single constricted channel is studied experimentally by tracking the particles individually. Surprisingly, the behavior is found to be qualitatively similar to that of inertial dry…
Blockage of pores by particles is found in many processes, including filtration and oil extraction. We present filtration experiments through a linear array of ten channels with one dimension which is sub-micron, through which a dilute…
During the transport of colloidal suspensions in microchannels, the deposition of particles can lead to the formation of clogs, typically at constrictions. Once a clog is formed in a microchannel, advected particles form an aggregate…
Liquid crystalline media mediate interactions between suspended particles and confining geometries, which not only has potential to guide patterning and bottom-up colloidal assembly, but can also control colloidal migration in microfluidic…
The assembly of colloidal particles at liquid/liquid or air/liquid interfaces is a versatile procedure to create microstructured monolayers and study their behavior under compression. When combined with soft and deformable particles such as…
Cake filtration is a widely used solid-liquid separation process. However, the high flow resistance of the nanoporous filter cake lowers the efficiency of the process significantly. The structure and thus the permeability of the filter…
We study a colloidal suspension confined between two quasi-parallel walls as a model system for glass transitions in confined geometries. The suspension is a mixture of two particle sizes to prevent wall-induced crystallization. We use…
Concentrated colloidal suspensions are a well-tested model system which has a glass transition. Colloids are suspensions of small solid particles in a liquid, and exhibit glassy behavior when the particle concentration is high; the…
We present an experimental micro-model of drying porous media, based on microfluidic cells made of arrays of pillars on a regular grid, and complement these experiments with a matching two-dimensional pore-network model of drying. Disorder,…
We theoretically investigate general properties of driven (sheared) colloidal suspensions in confinement, based on methods of classical density functional theory. In the absence of an exact closed (Smoluchowski-) equation for the…
The dynamics of colloidal suspension confined within porous materials strongly differs from that in the bulk. In particular, within porous materials, the presence of boundaries with complex shapes entangles the longitudinal and transverse…