相关论文: Model of a transition from low to high ablation re…
In the atmospheric pressure anodic carbon arc, ablation of the anode serves as a feedstock of carbon for production of nanomaterials. It is known that the ablation of the graphite anode in this arc can have two distinctive modes with low…
Comprehensive non-invasive spectroscopic techniques and electrical measurements of the carbon arc revealed two distinguishable plasma synthesis regions in the radial direction normal to the arc axis. These regions, which are defined as the…
A new parameterized model for the ablation phenomena is presented. The model describes the three different regimes usually observed, as a function of the laser fluence. The first one corresponds to a vaporization; it takes place at low…
A DC arc with a meltable metal anode in a near-atmospheric pressure hydrocarbon gas is an emerging method for producing single-walled carbon nanotubes (SWCNTs). In these systems, evaporation of the molten metal anode determines the…
A model for the formation of carbon nanotubes (CNTs) and layered graphene in an arc discharge method is developed on the basis of observed erosion of graphite anode under various experimental conditions and analyses of the morphology of the…
Short atmospheric pressure argon arc is studied numerically and analytically. In a short arc with inter-electrode gap of several millimeters non-equilibrium effects in plasma play important role in operation of the arc. High anode…
An efficient modified arc plasma method, where a focusing electric field is superimposed on the arc electric field, is optimized for the bulk generation of highly pure multi-walled carbon nanotubes. Raman spectroscopy and thermogravimetric…
Spherical quartz stones of around 1 cm in diameter have been exposed to anodic arc discharges in a helium atmosphere at 300 Torr. The arc current flowing between the graphite electrodes was set either in continuous DC mode (30-150 A) or in…
We report the near-field ablation of material from cellulose acetate coverslips in water and my- oblast cell samples in growth media, with a spot size as small as 1.5 {\mu}m under 3 {\mu}m wavelength radiation. The power dependence of the…
Composition analysis of LiF-C thin film for neutral and ionic contributions in Front Ablation (FA) and Back Ablation (BA) geometries in vacuum and 2\times10-1 mbar argon has been done. Temporal evolution of ionic to neutral ratio and…
Laser ablation of Al-Ni alloys and Al films on Ni substrates has been studied by molecular dynamics simulations (MD). The MD method was combined with a two-temperature model to describe the interaction between the laser beam, the electrons…
We investigate ablation experiments performed by laser-plasma-filament guided electrical discharges at high-voltages of up to 145 kV. The guiding was accomplished via fs-laser-generated plasma filaments across a gap of 201 mm of air onto…
Laser ablation in liquid (LAL) is important technique used for formation of nanoparticles (NP). The LAL processes cover logarithmically wide range of spatiotemporal scales and is not fully understood. The NP produced by LAL are rather…
Femtosecond micromachining offers a contact-free and mask-less technique for material patterning. With ultrafast laser irradiation, permanent modifications to the properties of single layer graphene through material ablation or defect…
In order to study properties of short carbon arcs, a self-consistent model was implemented into a CFD code ANSYS-CFX. The model treats transport of heat and electric current in the plasma and the electrodes in a coupled manner and accounts…
Ultrafast laser heating of electrons on a metal surface breaks the pressure equilibrium within the material, thus initiating ablation. The stasis of a room-temperature metal results from a balance between repulsive and attractive binding…
The covalent functionalization of graphene represents a main topic in the growing field of nano materials. The reductive exfoliation of graphite with concomitant functionalization of the respective graphenide intermediates provides a…
Here we demonstrate the selective bulk scale synthesis of delaminated graphene sheets by a proper choice of magnetic field modulating an electric-arc. An ultra-high purity glassy graphite anode was sublimated in an argon atmosphere. Carbon…
Periodic multilayers are nowadays widely used to perform x-ray analysis in the soft x-ray range (photon energy lower than 1 keV). However, they do not permit to obtain high-resolution spectra like natural or synthetic crystals. Thus,…
The physical mechanisms for damage formation in graphite films induced by femtosecond laser pulses are analyzed using a microscopic electronic theory. We describe the nonequilibrium dynamics of electrons and lattice by performing molecular…