相关论文: Mixing enhancement induced by viscoelastic micromo…

Mixing at the microfluidic scale is challenging due to the low Reynolds numbers and often high P\'eclet numbers. Without turbulence, mixing relies solely on diffusion, resulting in slow and inefficient mixing. We demonstrate enhanced mixing…

Encapsulation of chemicals using polymer membranes enables to control their transport and delivery for applications such as agrochemistry or detergency. To rationalize the design of polymer capsules, it is necessary to understand how the…

Microfluidic channels are integral to biomedical technology and process engineering, offering versatility in handling fluids with complex properties, often a combination of viscous and elastic attributes. Despite significant advancements in…

The addition of minute amounts of chemically inert polyacrylamide polymer to liquids results in large instabilities under steady electro-osmotic pumping through 2:1 constrictions, demonstrating that laminar flow conditions can be broken in…

The efficient mixing of fluid samples in miniaturized total analysis systems is essential for numerous applications including biological screening assays, chemical extraction, polymerization, cell analysis, and protein folding. Miniaturized…

The lack of a simple operable method for longitudinal dynamic self-assembly of particles in a microchannel is one of the main problems in applying this technology to a wide range of researches, such as biomedical engineering, material…

Motivated by recent experimental advances (Stroock et al. 2002) in microfluidic mixers, we study the passive mixing and flow properties of a patterned microchannel by means of computational fluid dynamics (CFD). Such geometries overcome the…

The emerging field of deformable microfluidics widely employed in the Lab-on-a-Chip and MEMS communities offers an opportunity to study a relatively under-examined physics. The main objective of this work is to provide a deeper insight into…

Microscopic flows are almost universally linear, laminar and stationary because Reynolds number, $Re$, is usually very small. That impedes mixing in micro-fluidic devices, which sometimes limits their performance. Here we show that truly…

Mixing in low Reynolds number flow is difficult because in this laminar regime it occurs mostly via slow molecular diffusion. This letter reports a simple way to significantly enhance low Reynolds number passive microfluidic flow mixing in…

Fluid transport in microfluidic systems typically is laminar due to the low Reynolds number characteristic of the flow. The inclusion of suspended polymers imparts elasticity to fluids, allowing instabilities to be excited when substantial…

Microfluidics involves the manipulation of flows at the microscale, typically requiring external power sources to generate pressure gradients. Alternatively, harnessing flows from active fluids, which are usually chaotic, has been proposed…

We investigate the influence of elastic turbulence on mixing of a scalar concentration field within a viscoelastic fluid in a two-dimensional Taylor-Couette geometry using numerical solutions of the Oldroyd-B model. The flow state is…

Diffusiophoresis, a ubiquitous phenomenon that induces particle transport whenever solute concentration gradients are present, was recently observed in the context of microsystems and shown to strongly impact colloidal transport (patterning…

We study the effect of the grafted polyelectrolyte layer on the flow dynamics, and its consequences on underlying mixing in the rotating microfluidic channel. For this analysis, the method used by Sadeghi et al. (J. Fluid Mech., vol. 887,…

Microorganism motility often takes place within complex, viscoelastic fluid environments, e.g., sperm in cervicovaginal mucus and bacteria in biofilms. In such complex fluids, strains and stresses generated by the microorganism are stored…

Chaotic flows drive mixing and efficient transport in fluids, as well as the associated beautiful complex patterns familiar to us from our every day life experience. Generating such flows at small scales where viscosity takes over is highly…

Chemical bioreactions play a significant role in many of the microfluidic devices, and their applications in biomedical science have seen substantial growth. Given that effective mixing is vital for initiating biochemical reactions in many…

In a microfluidic environment, the presence of bubbles is often detrimental to the functionality of the device, leading to clogging or cavitation, but microbubbles can also be an indispensable asset in other applications such as…

The self-assembly of copolymeric vesicles and micelles in micromixers is studied by External Potential Dynamics (EPD) simulations -- a dynamic density functional approach that explicitly accounts for the polymer architecture both at the…