相关论文: Position and attitude determination by integrated …
Integration of inertial navigation system (INS) and global navigation satellite system (GNSS) is usually implemented in engineering applications by way of Kalman-like filtering. This form of INS/GNSS integration is prone to attitude…
The task of strapdown inertial navigation system (SINS) initial alignment is to calculate the attitude transformation matrix from body frame to navigation frame. In this paper, such attitude transformation matrix is divided into two parts…
To obtain a high-accuracy position with SINS(Strapdown Inertial Navigation System), initial alignment needs to determine initial attitude rapidly and accurately. High-accuracy grade IMU(Inertial Measurement Uint) can obtain the initial…
A global navigation satellite system (GNSS) is a sensor that can acquire 3D position and velocity in an earth-fixed coordinate system and is widely used for outdoor position estimation of robots and vehicles. Various GNSS/inertial…
In this note, the attitude and inertial sensors drift biases estimation for Strapdown inertial navigation system is investigated. A semi-analytic method is proposed, which contains two interlaced solution procedures. Specifically, the…
Initial alignment is one of the key technologies in strapdown inertial navigation system (SINS) to provide initial state information for vehicle attitude and navigation. For some situations, such as the attitude heading reference system,…
This paper presents a novel method for attitude estimation of an object in 3D space by incremental learning of the Long-Short Term Memory (LSTM) network. Gyroscope, accelerometer, and magnetometer are few widely used sensors in attitude…
The in-flight alignment is a critical stage for airborne INS/GPS applications. The alignment task is usually carried out by the Kalman filtering technique that necessitates a good initial attitude to obtain satisfying performance. Due to…
The initial alignment provides an accurate attitude for SINS (strapdown inertial navigation system). By further estimating the IMU's bias and misalignment angle, the recursive Bayesian filter is accurate. However, the prior heading error…
Strapdown inertial navigation systems (SINS) are ubiquitious in robotics and engineering since they can estimate a rigid body pose using onboard kinematic measurements without knowledge of the dynamics of the vehicle to which they are…
Inertial motion capture systems widely use low-cost IMUs to obtain the orientation of human body segments, but these sensors alone are unable to estimate link positions. Therefore, this research used a SLAM method in conjunction with…
Traditional land vehicle gravity measurement heavily rely on high-precision satellite navigation positioning information. However, the operational range of satellite navigation is limited, and it cannot maintain the required level of…
Indoor tracking and pose estimation, i.e., determining the position and orientation of a moving target, are increasingly important due to their numerous applications. While Inertial Navigation Systems (INS) provide high update rates, their…
Global Navigation Satellite Systems (GNSS) aided Inertial Navigation System (INS) is a fundamental approach for attaining continuously available absolute vehicle position and full state estimates at high bandwidth. For transportation…
This paper develops an underwater navigation solution that utilizes a strapdown inertial navigation system (SINS) and fuses a set of auxiliary sensors such as an acoustic positioning system, Doppler velocity log, depth meter, attitude…
Alignment of the strapdown inertial navigation system (INS) has strong nonlinearity, even worse when maneuvers, e.g., tumbling techniques, are employed to improve the alignment. There is no general rule to attack the observability of a…
In this paper, the optimization-based alignment (OBA) methods are investigated with main focus on the vector observations construction procedures for the strapdown inertial navigation system (SINS). The contributions of this study are…
This paper describes a novel method for the estimation of the trajectory curve and orientation of a rigid body moving along a railway track. Compared to other recent developments in the literature, the presented approach has the significant…
Inertial sensors based on micro-electromechanical systems (MEMS) technology, such as accelerometers and angular rate sensors, are cost-effective solutions used in inertial navigation systems in a broad spectrum of applications that estimate…
Accurate and reliable navigation is essential for autonomous ground vehicle operations. Standard INS/GNSS fusion relies on GNSS position updates, which provide limited observability of orientation and inertial sensor error states,…