相关论文: Development of High Intensity Neutron Source at th…

The European Spallation Source linear proton accelerator will have a uniquely high power of 5 MW. The modifications and additions to the accelerator that are required to enable the generation of a uniquely intense neutrino Super Beam…

We report on our efforts to optimize the geometry of neutron moderators and converters for the TRIUMF UltraCold Advanced Neutron (TUCAN) source using MCNP simulations. It will use an existing spallation neutron source driven by a 19.3 kW…

The Spallation Neutron Source (SNS) is a pulsed source of neutrons and, as a byproduct of this operation, an intense source of neutrinos via stopped-pion decay. The COHERENT collaboration uses this source to investigate coherent elastic…

The long (3ms) proton pulse of the European Spallation Source (ESS) gives rise to unique and potentially high backgrounds for the instrument suite. In such a source an instrument capabilities will be limited by it's Signal to Noise (S/N)…

The Spallation Neutron Source (SNS), located at Oak Ridge Laboratory in the United States, will be coming online over the next few years. In addition to producing fluxes of high-intensity neutrons, the interaction of the proton beam with…

The characteristics of the Solid-state Neutron Detector, under development for neutron-scattering measurements at the European Spallation Source, have been simulated with a Geant4-based computer code. The code models the interations of…

Nowadays neutron scattering science is increasing its instrumental power. Most of the neutron sources in the world are pushing the development of their technologies to be more performing. The neutron scattering development is also pushed by…

The European Spallation Source (ESS) in Lund, Sweden will become the world's most powerful thermal neutron source. The Macromolecular Diffractometer (NMX) at the ESS requires three 51.2 x 51.2~cm$^{2}$ detectors with reasonable detection…

We present a conceptual design for a novel continuous wave electron-linac based high-intensity high-brightness slow-positron production source with a projected intensity on the order of 10$^{10}$ e$^+$/s. Reaching this intensity in our…

We propose a new scheme of producing intense neutron beam whose yields exceed those of existing facilities by many orders of magnitude. This scheme uses the recently proposed photon beam extracted from circulating quantum ions, which is…

The feasibility of a European next-generation very massive neutrino observatory in seven potential candidate sites located at distances from CERN ranging from 130 km to 2300 km, is being considered within the LAGUNA design study. The study…

Novel experimental techniques are required to make the next big leap in neutron electric dipole moment experimental sensitivity, both in terms of statistics and systematic error control. The nEDM experiment at the Spallation Neutron Source…

A novel cold neutron source (CNS) employing chessboard or staircase assemblies of high-aspect ratio rectangular (HARR) para-hydrogen (p-H2) moderators is proposed. It is demonstrated that this design can generate neutron beams with higher…

A new photonuclear thermal neutron facility has been developed at the Physics Department of University of Torino. The facility is based on a medical electron LINAC coupled to a compact converter and moderator assembly. A homogenous thermal…

A superconducting Double Spoke Resonator (DSR) is the technology of choice in a low energy section of a high power proton linear accelerator. At the FREIA laboratory in Uppsala University, we have tested two DSRs in a prototype cryomodule…

We report the first results on ultracold neutron production from a new spallation-driven superfluid $^4$He (He-II) source at TRIUMF, which is being prepared for a new, precise measurement of the neutron electric dipole moment. A total of…

For H- charge exchange (stripping) injection to European Spallation Source (ESS) storage ring it is necessary to have H- ion source with a current of ~90 mA, pulses duration 3 ms, and repetition of 14 Hz (duty factor ~4%) extendable to…

The high performance requirements at the European Spallation Source have been driving the technological advances on the neutron detector front. Now more than ever is it important to optimize the design of detectors and instruments, to fully…

Building an accelerator at six geographically dispersed sites is quite mad, but politically expedient. The Spallation Neutron Source (SNS), currently under construction in Oak Ridge, Tennessee, combines a pulsed 1 Gev H- superconducting…

The neutron time-of-flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN) is a pulsed white-spectrum neutron spallation source producing neutrons for two experimental areas: the Experimental Area 1 (EAR1), located…