相关论文: Fabrication of porous anodic alumina (PAA) templat…
The fabrication of assembled structures of topological defects in liquid crystals (LCs) has attracted much attention during the last decade, stemming from the potential application of these defects in modern technologies. A range of…
Porous silicon (PSi) layers has been prepared in this work via photoelectrochemical (PEC) etching process of an n type silicon wafers of two resistivities (3.5 ohm.cm and 0.02 ohm.cm) in hydrofluoric (HF) acid of 24.5 precent…
Two-dimensional materials (2DMs) have been widely investigated because of their potential for heterogeneous integration with modern electronics. However, several major challenges remain, such as the deposition of high-quality dielectrics on…
We report the first plasma atomic layer etching (ALE) process for diamond using a cyclic plasma sequence composed of two separated steps: oxygen surface modification and krypton ion removal. The process is implemented in an inductively…
Direct laser writing method is a promising technique for the large-scale and cost-effective fabrication of periodic nanostructure arrays exciting hybrid lattice plasmons. This type of electromagnetic mode manifests a narrow and deep…
Atomic layer deposition (ALD), a layer-by-layer controlled method to synthesize ultrathin materials, provides various merits over other techniques such as precise thickness control, large area scalability and excellent conformality. Here we…
Polarimetric phased arrays (PPAs) enhance radar target detection and anti-jamming capabilities, but their conventional dual transmit/receive (T/R) channel architecture leads to high cost and system complexity. To address these limitations,…
The control of material properties at the atomic scale remains a central challenge in materials science. Transition metal dichalcogenides (TMDCs) offer remarkable electronic and optical properties, but their functionality is largely…
The formation of a 3D network composed of free standing and interconnected Pt nanowires is achieved by a two-step method, consisting of conformal deposition of Pt by atomic layer deposition (ALD) on a forest of carbon nanotubes and…
Upgrading the productivity of nanoparticles (NPs), generated by pulsed laser ablation in liquid (PLAL), still remains challenging. Here a novel variant of PLAL was developed, where a doubled frequency Nd:YAG laser beam (532 nm, ~ 5 ns, 10…
We report on the development of some process capabilities for a polymer-based, multi-layer microelectrofluidic platform, namely: the hot embossing process, metallization on polymer and polymer bonding. Hot embossing experiments were…
The porous PLA foams potential for tissue engineering usage are prepared by a modified solvent casting/particulate leaching method with different crystallinity. Since in typical method the porogens are solved in the solution and flow with…
The advancement of liquid phase electron beam induced deposition has enabled an effective direct-write approach for functional nanostructure synthesis with the possibility of three-dimensional control of morphology. For formation of a…
Part of developing new strategies for fabrications of nanowire structures involves in many cases the aid of metal nanoparticles (NPs). It is highly beneficial if one can define both diameter and position of the initial NPs and make…
Photoacoustic imaging (PAI) is a non-invasive imaging modality that detects the ultrasound signal generated from tissue with light excitation. Photoacoustic computed tomography (PACT) uses unfocused large-area light to illuminate the target…
Lithium niobate is one of the most sought-after materials for nanophotonic devices, including frequency converters, modulators, and quantum light sources. Integration of lithium niobate into optical devices, however, is hampered by…
Irradiation of a sharp tungsten tip by a femtosecond laser and exposed to a strong DC electric field led to gradual and reproducible surface modifications. By a combination of field emission microscopy and scanning electron microscopy, we…
The annealing treatment in the advanced manufacturing process, e.g., laser-assisted manufacturing, determines the final state of glasses which is critical to its thermal, electrical and mechanical properties. Energy barriers analysis based…
The process of alumina coating on the steel surface plasma electrolytic method is a method for increasing the corrosion resistance, in this process, electrolytic aluminum containing compounds should be able to cover the surface. The results…
In the recent years graphitization of ion-beam induced amorphous layers became the basic tool for device fabrication in diamond. The etchable graphitic layers can be removed to form free-standing membranes into which the desired structures…