相关论文: Impedance reduction of the High-frequency Cavities…

In the framework of the LHC Injectors Upgrade project, the CERN Proton Synchrotron underwent hardware changes during the Long Shutdown 2. These changes required an update of the CERN Proton Synchrotron impedance model and an assessment of…

The Super Proton Synchrotron (SPS) injection system plays a fundamental role to preserve the quality of injected high-brightness beams for the Large Hadron Collider (LHC) physics program and to maintain the maximum storable intensity. The…

The acceleration of high-intensity lead (Pb) beams for injection into the Large Hadron Collider (LHC) is limited by significant losses in the preceding CERN ion injector chain. A potential but largely uncharted source of losses are…

The Large Hadron Collider (LHC) at CERN is a 7 TeV proton synchrotron, with a design stored energy of 362 MJ per beam. The high-luminosity (HL-LHC) upgrade will increase this to 675 MJ per beam. In order to protect the superconducting…

The Super Proton Synchrotron (SPS) is the last stage in the injector chain for CERN's Large Hadron Collider, and it also provides proton and ion beams for several fixed-target experiments. The SPS has been in operation since 1976, and it…

For the future intensity increase of the fixed-target beams in the CERN accelerator complex, a barrier-bucket scheme has been developed to reduce the beam loss during the 5-turn extraction from the PS towards the SPS, the so-called…

Precisely determining the gap voltage and phase in an RF cavity is essential for the calibration of the LLRF feedbacks. Following the conventional approach, measured RF power is converted into gap voltage, assuming a given shunt impedance.…

The Large Hadron Collider (LHC) at CERN will undergo an upgrade in order to increase its luminosity to $7.5 \times 10^{34}$ cm$^{-2}$s$^{-1}$. The increased luminosity during this High-Luminosity running phase (HL-LHC), starting around…

The Electron Multipacting (EM) phenomenon is a limiting factor for the achievement of high luminosity in accelerators for positively charged particles and for the performance of RF devices. At CERN, the Super Proton Synchrotron (SPS) must…

As the pre-injector of the LHC injector chain, the proton linac at CERN is required to provide a high-intensity (180mA) beam to the Proton Synchrotron Booster. The results of measurements at this intensity will be presented. Furthermore,…

The High Luminosity LHC (HL-LHC) phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. The foreseen gradual increase of the instantaneous luminosity of up to more than twice its…

The challenging High Luminosity LHC (HL-LHC) beam requirements will lead in the future to unprecedented beam parameters along the LHC injector chain. In the SPS accelerator these requests translate into about a factor two higher intensity…

The Large Hadron Collider (LHC) at CERN has been instrumental in recent advances in experimental high energy physics by colliding beams of protons and heavier nuclei at unprecedented energies. The present heavy-ion programme is based mainly…

The High Luminosity upgrade of the CERN Large Hadron Collider (HL-LHC) requires new high-radiation tolerant silicon pixel sensors for the innermost part of the tracking detector in the CMS experiment. The innermost layer of the tracker,…

Space charge is typically one of the performance limitations for the operation of high intensity and high brightness beams in circular accelerators. In the Proton Synchrotron (PS) at CERN, losses are observed for vertical tunes above…

The design of a primary electron beam facility at CERN is described. The study has been carried out within the framework of the wider Physics Beyond Colliders study. It re-enables the Super Proton Synchrotron (SPS) as an electron…

Hybrid silicon pixel detectors are currently used in the innermost tracking system of the Compact Muon Solenoid (CMS) experiment. Radiation tolerance up to fluences expected for a few years of running of the Large Hadron Collider (LHC) has…

A timely and long-term programme of kaon decay measurements at a new level of precision is presented, leveraging the capabilities of the CERN Super Proton Synchrotron (SPS). The proposed programme is firmly anchored on the experience built…

The high-luminosity upgrade of the CERN LHC requires the replacement of the CMS tracking detector to cope with the increased radiation fluence while maintaining its excellent performance. An extensive R\&D program, aiming at using 3D pixel…

The CERN accelerator complex prepares protons for the four big experiments at the Interaction Regions of the Large Hadron Collider (LHC) as well as for a number of fixed target experiments, which take beam directly from the LHC injectors.…