相关论文: Co-optimization of a piezoelectric energy harvesti…
In the studies of piezoelectric energy harvesting (PEH) systems, literature has shown that circuit advancement has a significant effect on the enhancement of energy harvesting capability in resonance. On the other hand, some recent studies…
Piezoelectric Energy Harvesters (PEHs) are typically employed to provide additional source of energy for a sensing system. However, studies show that a PEH can be also used as a sensor to acquire information about the source of vibration by…
Vibrational energy harvested from the bridge excitation due to the traffic flow or the wind load can be supplied to sensors in a Structural Health Monitoring (SHM) system and help prolong its service life, reduce chemical battery waste and…
This paper reports a method to design highly coupled piezoelectric energy harvesters with frequency tuning capabilities using nonlinear electrical techniques. A cantilever beam with two PMN-PT patches has been optimized thanks to both…
Piezoelectric energy harvesters (PEHs) can be used as an additional power supply for a Structural Health Monitoring (SHM) system. Its design can be optimised for the best performance; however, the optimal design depends on the input…
This work studies a broadband graded metamaterial, which integrates the piezoelectric energy harvesting function targeting low-frequency structural vibrations, lying below 100 Hz. The device combines a graded metamaterial with beam-like…
Energy Harvesting technologies will play a fundamental role in the development of the next generation of electronic systems as well as in advancing the development of sustainable infrastructure. One of the critical challenges in EH is…
Bearings are critical components in industrial machinery, yet their vulnerability to faults often leads to costly breakdowns. Conventional fault detection methods depend on continuous, high-frequency vibration sensing, digitising, and…
This work introduces a novel methodology to assess the performance of Piezoelectric Energy Harvesters (PEHs) in order to study auxetic enhancement possibilities. For this purpose, a new approach for evaluating the intrinsic effective…
Smart multiantenna wireless power transmission can enable perpetual operation of energy harvesting (EH) nodes in the internet-of-things. Moreover, to overcome the increased hardware cost and space constraints associated with having large…
This study introduces a two-degree-of-freedom piezoelectric energy harvester designed to harness rotational motion as an energy source. The harvester is built using a cut-out beam, which enables the first two resonant frequencies to be…
Energy harvesting (EH) is a multidisciplinary research area, involving physics, materials science and engineering, with the objective of providing renewable sources of sufficient power to operate targeted low-power applications.…
Energy harvesting (EH) from ambient radio-frequency (RF) electromagnetic waves is an efficient solution for fully autonomous and sustainable communication networks. Most of the related works presented in the literature are based on specific…
In this letter, a novel wireless powered protocol is proposed to maximize the system throughput of an energy harvesting (EH) based cognitive radio network, while satisfying a minimum primary user rate requirement. For EH, we exploit both…
In this paper, we explore an electromechanical metastructure consisting of a periodic array of piezoelectric bimorphs with resistive-inductive loads for simultaneous harvesting and attenuation of traveling wave energy. We develop fully…
Piezoelectric vibration energy harvesters have attracted much attention due to its potential to replace currently popular batteries and to provide an sustainable power sources. Many researchers have proposed ways to increase the performance…
We present an experimental and numerical study of a piezoelectric energy harvester driven by broadband vibrations. This device can extract power from random fluctuations and can be described by a stochastic model, based on an underdamped…
In this paper, the theoretical sustainable capacity of wireless networks with radio frequency (RF) energy harvesting is analytically studied. Specifically, we consider a large scale wireless network where base stations (BSs) and low power…
This study presents a novel piezoelectric beam structure for acoustic energy harvesting. The beams have been designed to maximize output energy in areas where the noise level is loud such as highway traffic. The beam consists of two layers…
Through simultaneous energy and information transfer, radio frequency (RF) energy harvesting (EH) reduces the energy consumption of the wireless networks. It also provides a new approach for the wireless devices to share each other's energy…