相关论文: Compressive performance and crack propagation in A…
The mechanical properties of layered, hexagonal-structured MAX phases often show the combined merits of metals and ceramics, making them promising material candidates for safety critical applications. While their unique mechanical…
Crack growth in stress corrosion cracking (SCC) in 7xxx Al alloys is an intermittent process, which generates successive crack arrest markings (CAMs) visible on the fracture surface. It is conjectured that H is generated at the crack tip…
Achieving a combination of high mechanical strength and high electrical conductivity in low-weight Al alloys requires a full understanding of the relationships between nanoscaled features and physical properties. Grain boundary…
The real-time dissolution of the single-phase compositionally complex alloy (CCA), Al1.5TiVCr, was studied using an inline inductively coupled plasma method. Compositionally complex alloys (CCAs), a term encompassing high entropy alloys…
We investigate the acoustical properties of uncompressed and compressed open-celled aluminum metal foams fabricated using a directional solidification foaming process. We compressed the fabricated foams using a hydraulic press to different…
Alloying Ti-Al-N coatings with Ta has proven to enhance their hardness, thermal stability, and oxidation resistance. However, especially for arc-evaporated Ti-Al-Ta-N coatings only limited information on the detailed influence of the…
Oxide dispersion strengthened FeCrAl alloys dispersed high-density nano-oxides in the matrix show outstanding corrosion resistance and mechanical properties. However, ODS FeCrAl alloys achieve the high strength generally at the expense of…
This paper explores the global Mode I fracture energy of a carbon fiber composite subject to a biaxial stress state at a crack tip, specifically in which one stress component is compressive and parallel to the crack. Based on an…
The focus of the article is on fracture criteria for dynamic crack propagation in elastic materials with microstructures. Steady-state propagation of a Mode III semi-infinite crack subject to loading applied on the crack surfaces is…
The microstructure of Mg-Al-Ca alloys consists of a hard intra- and intergranular eutectic Laves phase network embedded in a soft $\alpha$-Mg matrix. For such heterogeneous microstructures, the mechanical response and co-deformation of both…
This paper presents progress towards the large-scale manufacturability of piezo- and ferroelectric Al$_{1-x}$Sc$_x$N thin films with very high Sc content. Al$_{0.6}$Sc$_{0.4}$N layers were deposited by reactive sputtering from a 300 mm…
We used molecular dynamics simulations based on a potential model in analogy to the Tight Binding scheme in the Second Moment Approximation to simulate the effects of aluminum icosahedral grains (dispersoids) on the structure and the…
We study the nucleation and development of crack patterns in thin composite fibers under tension in this work. A fiber comprises an elastic core and an outer layer of a weaker brittle material. In recent tensile experiments on such…
This paper presents a combined numerical-theoretical study of the macroscopic behavior and local field distributions in a special class of two-dimensional periodic composites with viscoplastic phases. The emphasis is on strongly nonlinear…
The widespread use of sodium aluminosilicate glass in many engineering applications due to its mechanical and optical properties (transparency, dielectric, etc.), has become common in recent years. However, glass, a brittle material, has…
Refractory high-entropy alloys, RHEAs, are promising high-temperature structural materials. Their large compositional space poses great design challenges for phase control and high strength-ductility synergy. The present research pioneers…
Compositionally complex alloy systems containing more than five principal elements allow exploring a wide range of compositions, processing, and structural variables with the hope for identifying unique properties. Such opportunities also…
The susceptibility of nickel-based superalloys to processing-induced crack formation during laser powder-bed additive manufacturing is studied. Twelve different alloys -- some of existing (heritage) type but also other newly-designed ones…
The interaction of crystalline defects leads to strain hardening in bulk metals. Metals with high stacking fault energy (SFE), such as aluminum, tend to have low strain hardening rates due to an inability to form stacking faults and…
Dynamic experiments with Al-W granular/porous composites revealed qualitatively different behavior with respect to shear localization depending on bonding between Al particles. Two-dimensional numerical modeling was used to explore the…