相关论文: Influence of hydrogen radicals treatment on layers…

In this thesis, two different optical management techniques for organics based solar cells are explored. The first part is focused on the development of a textured rear reflector for OPVs. The use of textured reflector (TR) facilitates an…

This work studies the effect of four different types of buffer layers on the structural and optical properties of InGaN layers grown on Si(111) substrates and their correlation with electrical characteristics. The vertical electrical…

We investigate and evaluate the contribution of the ultraviolet radiation spectrum on the temperature and efficiency of commercial crystalline silicon-based photovoltaics (PVs) that operate outdoors. The investigation is performed by…

In this article, a novel hot wire oxidation-sublimation deposition (HWOSD) technique was developed to prepare molybdenum oxide (MoOx) thin films with high quality. Silicon heterojunction (SHJ) solar cells with the HWOSD MoOx as a hole…

Graphene has shown great application opportunities in future nanoelectronic devices due to its outstanding electronic properties. Moreover, its impressive optical properties have been attracting the interest of researchers, and, recently,…

Compound semiconductors have been the predominant building blocks for the current mid-infrared thermophotovoltaic devices relevant to sub-2000 K heat conversion and power beaming. However, the prohibitively high cost associated with these…

Hybrid organic-inorganic halide perovskites have emerged as a disruptive new class of materials, exhibiting optimum properties for a broad range of optoelectronic applications, most notably for photovoltaics. The first report of highly…

Systematic studies of the gradual fabrication by means of carbon ion-implantation of high-quality 6H-SiC layers on silicon surfaces have been carried out. The fluence of carbon ions varied from 5*10^15 cm-2 to 10^17 cm-2. Results of…

Making solution-cast organic solar cells industrially available generally comes at the cost of significant performance losses compared to device prototypes manufactured under laboratory conditions. Adjusting solvent evaporation kinetics is…

In hydrogenated amorphous silicon oxide (a-SiO:H) films, incorporation of oxygen enhances optical gap due to a large number of St-O-Si bond formation, which lies deep into valence band states. An induction effect of this Si-O on other bonds…

Atomic hydrogen cleaning followed by heat cleaning at 450$^\circ$C was used to prepare negative-electron-affinity GaAs photocathodes. When hydrogen ions were eliminated, quantum efficiencies of 15% were obtained for bulk GaAs cathodes,…

Photonics has been one of the primary beneficiaries of advanced silicon manufacturing. By leveraging on mature complementary metal-oxide-semiconductor (CMOS) process nodes, unprecedented device uniformities and scalability have been…

Carbon materials are excellent candidates for photovoltaic solar cells: they are Earth-abundant, possess high optical absorption, and superior thermal and photostability. Here we report on solar cells with active layers made solely of…

Power-conversion efficiency is a critical factor for the wider adoption of solar-cell modules. Thin-film solar cells are cheap and easy to manufacture, but their efficiencies are low compared to crystalline-silicon solar cells and need to…

Hydrogenated Amorphous Silicon (a-Si:H) is a material well known for its intrinsic radiation hardness and is primarily utilized in solar cells as well as for particle detection and dosimetry. Planar p-i-n diode detectors are fabricated…

The band offsets between crystalline and hydrogenated amorphous silicon (a-Si:H) are key parameters governing the charge transport in modern silicon hetrojunction solar cells. They are an important input for macroscopic simulators that are…

The loss of amorphous hydrogenated silicon nitride (a-SiN$_{x}$:H) is measured at 30 mK and 5 GHz using a superconducting LC resonator down to energies where a single-photon is stored, and analyzed with an independent two-level system (TLS)…

This study constructs a hybrid module with a multi-material collaborative detection architecture by integrating silicon pixel layers into the longitudinally segmented scintillating fiber sampling calorimeter module and optimizes the…

Reducing the thickness of Cu(In,Ga)Se2 solar cells is a key objective in order to reduce production cost and to improve sustainability. The major challenge for sub-micron Cu(In,Ga)Se2 cells is the recombination at the backside. In standard…

The production of hydrogen fuels, via water splitting, is of practical relevance for meeting global energy needs and mitigating the environmental consequences of fossil-fuel-based transportation. Water photoelectrolysis has been proposed as…