相关论文: Lithographically defined site-selective growth of …

This investigation deals with the effect of growth temperature on the growth behavior of Fe filled multiwalled carbon nanotubes (MWCNTs). Carbon nanotube (CNT) synthesis was carried out in a thermal chemical vapor deposition (CVD) reactor…

In this study, the synthesis of multi-walled carbon nanotubes (MWCNTs) was carried out by chemical vapor deposition (CVD) using propane as the carbon source and Si as the catalyst support. The effect of CVD process variables such as…

The effect of Fe and Ni catalysts on the synthesis of carbon nanotubes (CNTs) using atmospheric pressure chemical vapor deposition (APCVD) was investigated. Field emission scanning electron microscopy (FESEM) analysis suggests that the…

Fe filled carbon nanotubes were synthesized by atmospheric pressure chemical vapor deposition using a simple mixture of iron acetylacetonate with a conventional photoresist and the effect of growth temperature from 550 to 950 {\deg}C on Fe…

Growth of carbon nanotubes (CNTs) was performed by atmospheric pressure chemical vapour deposition (APCVD) of propane on Si(111) with a pre-treated Ni overlayer acting as a catalyst. Prior to the growth of CNTs, a thin film of Ni was…

The surface reconstruction of the Fe catalyst films due to high temperature processing in hydrogen prior to nanotube nucleation and its effect on the growth morphologies of partially filled carbon nanotubes (CNTs) synthesized using…

The synthesis of Ni filled multiwalled carbon nanotubes was performed by atmospheric pressure chemical vapor deposition with propane on Si at 850 C using a simple mixture of Ni(salen), and a conventional photoresist. Analysis of the carbon…

We explore the role of Mo in Fe:Mo nanocatalyst thermodynamics for low-temperature chemical vapor deposition growth of single walled carbon nanotubes (SWCNTs). By using the size-pressure approximation and ab initio modeling, we prove that…

Controlled growth, patterning and placement of carbon nanotube (CNT) thin films for electronic applications are demonstrated. The density of CNT films is controlled by optimizing the feed gas composition as well as the concentration of…

Our group recently reproduced the water-assisted growth method, so-called "super growth", of millimeter-thick single-walled carbon nanotube (SWNT) forests by using C2H4/ H2/ H2O/ Ar reactant gas and Fe/ Al2O3 catalyst. In this current work,…

We report on the synthesis of carbon nanotubes on quasicrystalline alloys. Aligned multiwalled carbon nanotubes (MWNTs) on the conducting faces of decagonal quasicrystals were synthesized using floating catalyst chemical vapor deposition.…

Single-walled carbon nanotubes (SWNTs) are potential materials for future nanoelectronics. Since the electronic and optical properties of SWNTs strongly depend on tube diameter and chirality, obtaining SWNTs with narrow (n,m) chirality…

A parametric study of so-called "super growth" of single-walled carbon nanotubes(SWNTs) was done by using combinatorial libraries of iron/aluminum oxide catalysts. Millimeter-thick forests of nanotubes grew within 10 min, and those grown by…

Large-scale fully interconnected ring carbon nanotube (CNT) networks were first prepared using thermo chemical vapor deposition in nano-channel network templates of porous anodic alumina. This conductive CNT network film consists of…

Chemical vapor deposition synthesis of single-walled carbon nanotubes experiments, using Fe catalyst, and alternating methane and carbon monoxide as carbon feedstocks, lead to the reversible formation of junctions between tubes of different…

Carbon nanotubes (CNTs) have found plenty of applications in electronics, sensing, actuation, mechanical structures, etc. There is a growing demand to produce large scale arrays of CNTs that can satisfy the requirements of cost effective,…

Carbon nanotubes are a fraction of the size of transistors used in today's best microchips, as it could reduce power demands and heating in next electronics revolution. Present study investigates the electronic and magnetic structure of…

Ever since the landmark discovery of single-walled carbon nanotubes (SWNTs) in 1993, they have been considered as ideal materials for any kind of application based on their outstanding properties (e.g. mechanical strength, thermal…

We have taken advantage of the native surface roughness and the iron content of AISI 316 stainless steel to direct grow multi-walled carbon nanotube (MWCNT) random networks by chemical vapor deposition (CVD) at low-temperature ($<…

Various diameters of alumina-supported Fe catalysts are used to grow single-walled carbon nanotubes (SWCNTs) with chemical vapor decomposition. We find that the reduction of the catalyst size requires an increase of the minimum temperature…