相关论文: Imaging across the Short-Wave Infra-Red (SWIR) Ban…
We designed, fabricated and characterized a flat multi-level diffractive lens (MDL) comprised of only silicon with diameter = 15.2mm, focal length of 19mm, and operating over the longwave infrared (LWIR) spectrum of 8um to 14um. We…
It is generally assumed that correcting chromatic aberrations in imaging requires optical elements. Here, we show that by allowing the phase in the image plane to be a free parameter, it is possible to correct chromatic variation of focal…
It is generally thought that correcting chromatic aberrations in imaging requires multiple surfaces. Here, we show that by allowing the phase in the image plane of a flat lens to be a free parameter, it is possible to correct chromatic…
We demonstrate imaging over the visible band using a single planar diffractive lens. This is enabled via multi-level diffractive optics that is designed to focus over a broad wavelength range, which we refer to as an achromatic diffractive…
Recent theoretical work suggested upper bounds on the operating bandwidths of flat lenses. Here, we show how these bounds can be circumvented via a multi-level diffractive lens (MDL) of diameter = 100 mm, focal length = 200 mm, device…
We experimentally demonstrate imaging in the longwave-infrared (LWIR) spectral band (8um to 12um) using a single polymer flat lens based upon multi-level diffractive optics. The device thickness is only 10{\mu}m, and chromatic aberrations…
Flat lenses enable thinner, lighter, and simpler imaging systems. However, large-area and high-NA flat lenses have been elusive due to computational and fabrication challenges. Here, we applied inverse design to create a multi-level…
A lens performs an approximately one-to-one mapping from the object to the image planes. This mapping in the image plane is maintained within a depth of field (or referred to as depth of focus, if the object is at infinity). This…
We demonstrate an inverse designed achromatic, flat, polarization-insensitive diffractive optic element, i.e., multilevel diffractive lens (MDL), operating across a broadband range of UV light (250 nm - 400 nm) via numerical simulations.…
Recently, the multilevel diffractive lenses (MDLs) have attracted considerable attention mainly due to their superior wave focusing performance; however, efforts to correct the chromatic aberration are still in progress. Here, we…
We design, fabricate, and characterize multifunctional and compact diffractive microlenses with sub-wavelength thickness and the capability to simultaneously focus visible and near-infrared spectral bands at two different focal positions…
It is generally thought that correcting chromatic aberrations in imaging requires multiple surfaces. Here, we show that by allowing the phase in the image plane of a flat lens to be a free parameter, it is possible to correct chromatic…
We demonstrate a high-NA (0.88), ultra-low-f-number (f/0.2714), multi-wavelength (480nm, 550nm and 650nm) multilevel diffractive MicroLens Array (MLA) using inverse design. Each microlens in the array is close-packed with diameter of 70…
Recently, there has been an explosion of interest in metalenses for imaging. The interest is primarily based on their sub-wavelength thicknesses. Diffractive lenses have been used as thin lenses since the late 19th century. Here, we show…
Subwavelength diffractive optics known as meta-optics have demonstrated the potential to significantly miniaturize imaging systems. However, despite impressive demonstrations, most meta-optical imaging systems suffer from strong chromatic…
Long-wave infrared (LWIR, 8-12 $\mu m$ wavelengths) is a spectral band of vital importance to thermal imaging. Conventional LWIR optics made from single-crystalline Ge and chalcogenide glasses are bulky and fragile. The challenge is…
We introduce a novel method for creating a high-quality, sharply defined, non-diffracting optical bottle beam by focusing a Bessel beam propagating through a flat multi-level diffractive lens (MDL). This study highlights the impact of the…
Chromatic aberrations impose a fundamental barrier on optical design, confining most imaging systems to narrow spectral bands with fractional bandwidths typically limited to $\Delta\lambda/\lambda < 1$. Here we report a monolithic,…
Mid-wave infrared (MWIR) frequency comb is expected to dramatically improve the precision and sensitivity of molecular spectroscopy. For high resolution application, high speed MWIR photodetector is one of the key components, however, the…
Traditional glass-based optics are typically optimized for narrow spectral bands, such as the visible (400-700nm) or shortwave infrared (1000-1800nm). While the emergence of VIS-SWIR sensors (400-1700nm) offers transformative potential,…