相关论文: Mechanical Characterisation of the Protective Al$_…
The mechanical properties of layered, hexagonal-structured MAX phases often show the combined merits of metals and ceramics, making them promising material candidates for safety critical applications. While their unique mechanical…
MAX phases are used on an industrial scale in the transportation, armour, and furnace development sectors, among others. However, data on the dynamical properties of these materials under varying temperature and pressure conditions are rare…
The present work describes a synthesis route for bulk Ta4AlC3 MAX phase ceramics with high phase purity. Pressure assisted densification was achieved by both hot pressing and spark plasma sintering of tantalum hydride, aluminium and carbon…
Thermal shock resistance is one of the performance-defining properties for applications where extreme temperature gradients are required. The thermal shock resistance of a material can be described by means of the thermal shock parameter…
The term "MAX phase" refers to a very interesting and important class of layered ternary transition-metal carbides and nitrides with a novel combination of both metal and ceramic-like properties that have made these materials highly…
A mechanism to explain the lower onset strengthening temperature induced by CaCO$_3$ in alumina-based macroporous ceramics is proposed, which relies on hydrocalumite-like phase formation during processing. Close to 600$^\circ$C, such phases…
The effect of sintering regimes on the density, microstructure parameters, and mechanical properties of Al2O3 and Al2O3 + 0.25%MgO ceramics has been investigated. The ceramics were sintered in three regimes: Regime I - heating at a constant…
Alumina forming, oxidation and thermal shock resistant MAX phases are of a high interest for high temperature applications. Herein we report, on bonding and resulting interactions between a Ni-based superalloy, NSA, and two alumina forming…
Complex intermetallic materials known as MAX phases exhibit exceptional properties from both metals and ceramics, largely thanks to their nanolayered structure. With high-resolution scanning transmission electron microscopy supported by…
Here, we report a process of metallic sealing using small well-separated Ag nanorods; the process is at room temperature under a small mechanical pressure of 9.0 MPa, and also in ambient. The metallic seals have an air leak rate of 1.1 x…
New generation concentrated solar power (CSP) plants require new solar receiver materials with selective optical properties and excellent corrosion resistance against molten salts. MAX phases are promising materials for CSP applications due…
Further development of nuclear power plant technology relies heavily on materials durability under operating conditions. Estimating the materials performance in the operando tests is crucial. In this paper, the mechanical behavior of thin…
The Zr-based MAX phases have attracted considerable attention for their outstanding irradiation behavior and high neutron transparency relevant to nuclear power generation technologies. In spite of increased understanding of physical…
Samples of $\alpha$-SiC have been sintered with liquid phase (LPS) to 1950 $^\circ$C, in atmosphere of argon and processing times between 1 and 7 hours. Using scanning electron microscopy (SEM) the microstructure of the samples has been…
Ceramic samples, produced by conventional sintering method in ambient air, 6H-SrMnO$_3$(6H-SMO), 15R-BaMnO$_3$(15R-BMO), 4H-Ba$_{0.5}$Sr$_{0.5}$MnO$_3$(4H-BSMO) were studied. In the XRD measurements for SMO the new anomalies of the lattice…
We present mechanical measurements performed at low temperatures on cantilever-based microelectro-mechanicalstructures(MEMS) coated with a metallic layer. Two very different coatings are presented in order to illustrate the capabilities of…
This work investigates the compatibility of $Zr_{2}AlC$ MAX phase-based ceramics with liquid LBE, and proposes a mechanism to explain the observed local $Zr_{2}AlC$/LBE interaction. The ceramics were exposed to oxygen-poor ($C_{O}\le2.2…
Herein we report on the thermal expansions and temperature-dependent crystal structures of select ternary carbide MAX phases in the Ti-Al-C phase diagram in the 100-1000 deg C temperature range. A bulk sample containing 38 wt.% Ti5Al2C3,…
The influence that the atmosphere (N_2 or Ar) and sintering time have on microstructure evolution in liquid-phase-sintered alpha-sic and on its mechanical properties at high temperature was investigated. The microstructure of the samples…
The paper presents a new approach, based on controlled oxidation of nanoscale metallic multilayers, to produce strong and hard oxide/metal nanocomposite coatings with high strength and good thermal stability. The approach is demonstrated by…