相关论文: Requirements for functional pn-homojunctions in le…
Traditional inorganic semiconductors can be electronically doped with high precision. Conversely, there is still conjecture regarding the assessment of the electronic doping density in metal-halide perovskites, not to mention of a control…
Conventional models of planar and bulk heterojunction organic solar cells have been extended by introducing doping in the active layer. We have studied the performance of organic solar cells as a function of dopant concentration. For bulk…
Most traditional semiconductor materials are based on the control of doping densities to create junctions and thereby functional and efficient electronic and optoelectronic devices. The technology development for halide perovskites had…
Modern photovoltaic devices are often based on a heterojunction structure where two components with different optoelectronic properties are interfaced. The properties of each side of the junction can be tuned by either utilizing different…
Photovoltaic solar cell is one of the main renewable energy sources, and its power conversion efficiency (PCE) is improved by employing doping or heterojunction to reduce the photogenerated carrier recombination. Here, we propose a…
Realizing basic semiconductor devices such as p-n junctions are necessary for developing thin-film and optoelectronic technologies in emerging planar materials such as MoS2. In this work, electrostatic doping by buried gates is used to…
Inorganic Halide perovskites (HP's) of the CsPbX3 (X=I, Br, Cl) type have reached prominence in photovoltaic solar cell efficiencies. Peculiarly, they have shown, however, an asymmetry in their ability to be doped by holes rather than by…
Ni et al. report minimum bulk trap densities of 10^11 cm-3 and 1-4 orders change in interfacial trap densities derived from drive-level capacitance profiling of lead halide perovskites. From basic electrostatic arguments, we show that such…
The theoretical analysis of photovoltaic conversion efficiency of highly effective silicon solar cells (SC) is performed for n-type and p-type bases. The case is considered when the Shockley-Read-Hall recombination in the silicon bulk is…
Recently Cui et al. reported on the fabrication a p-n homojunction perovskite solar cell (PSC) using stoichiometric control of sequentially-deposited perovskite layers. The authors propose that the junction leads to an enhanced electric…
Capacitance measurements as a function of voltage, frequency and temperature are useful tools to identify fundamental parameters that affect solar cell operation. Techniques such as capacitance-voltage (CV), Mott-Schottky analysis and…
One effective way to prevent toxicity and improve the stability of materials for photovoltaic applications is to exclude lead and organic molecules from perovskite materials. Specifically, the CsSn1-xGexI3 appears to be a promising…
The growth of heavily doped tunnel junctions in inverted metamorphic multijunction solar cells induces a strong diffusion of Zn via a point-defects-assisted mechanism. The redistribution of Zn can compensate the n-type doping in the emitter…
The hybrid halide perovskites, the very performant compounds in photovoltaic applications, possess large Seebeck coefficient and low thermal conductivity making them potentially interesting high figure of merit ($ZT$) materials. For this…
Two critical limitations of organic-inorganic lead halide perovskite materials for solar cells are their poor stability in humid environments and inclusion of toxic lead. In this study, high-throughput density functional theory (DFT)…
Lead-halide perovskites attracted attention as materials for high-efficiency solar cells and light emitting applications. Among their attributes are solution processability, high absorbance in the visible spectral range and defect…
Divalent cations mixed lead halide perovskites with enhanced performances, high stabilities, and reduced toxicity are requisite to make persistent progress in perovskite solar cells. However, the mixing strategy is not reported extensively…
Organic-inorganic halide perovskites recently have emerged as a promising material for highly effective light-emitting diodes (LEDs) and solar cells (SCs). Despite efficiencies of both perovskite SCs and LEDs are already among the best, the…
The performances of various configurations of InGaN solar cells are compared using nextnano software. Here we compare a flat base graded wall GaN/InGaN structure, with an InxGa1-xN well with sharp GaN contact layers, and an InxGa1-xN…
To be able to increase the efficiency of perovskite solar cells which is one of the most substantial challenges ahead in photovoltaic industry, the structural and optical properties of perovskite CH3NH3PbI3-xBrx for values x=1-3 have been…