相关论文: Four-electrodes DBD plasma jet device with additio…
An experimental investigation comparing the properties of plasma jets in dielectric barrier discharge (DBD) configurations using a powered electrode with and without a dielectric barrier, while keeping a second dielectric barrier over the…
Dielectric barrier discharge (DBD) plasma actuator arrays have been suggested as active flow control devices due to the robust electrohydrodynamic (EHD) force generation in variable atmospheric conditions. DBD plasma augmentation schemes…
The use of dielectric barrier discharge (DBD) plasmas has become a practical way to carry out surface treatment and one seeks to do it in a more efficient way, which requires to have control of the plasma parameters like rotational and…
Dielectric barrier discharge (DBD) plasma is used for various applications. DBD is also one of the most efficient and low-cost methods for active fluid flow control. In this study, a detailed physical model of DBD in atmospheric pressure at…
Dielectric Barrier Discharge (DBD) plasma actuators with an asymmetric, straight edge electrode configuration generate a wall-bounded jet without moving parts. Mechanistic description of the interaction between the Coulombic forces and…
Dielectric Barrier Discharge (DBD) plasma jets has been studied extensively in recent years because of its wide range of applications. DBD plasmas can be produced using many different gases and can be applied to a broad variety of surfaces…
Dielectric barrier discharge (DBD) plasma actuators generate an electrohydrodynamic (EHD) force through the ionization and acceleration of charged species. Most active flow control DBD applications are only practical at lower Reynolds…
Atmospheric pressure capillary dielectric barrier oxygen discharge plasma jet is developed to generate non-thermal plasma using unipolar positive pulse power supply. Both optical and electrical techniques are used to investigate the…
We use a pin-grid electrode to introduce a corrugated electrical potential into a planar dielectric-barrier discharge (DBD) system, so that the amplitude of the applied electric field has the profile of a two-dimensional square lattice. The…
A new design of plasma source that merges the main features of capacitive dielectric barrier discharge (DBD) and cold atmospheric plasma jet (CAPJ) is discussed. The DBD system consists of a flexible, porous matrix consisting of silica…
In this work we studied processing of poly(dimethylsiloxane) (PDMS) surfaces using dielectric barrier discharge (DBD) plasma in two different assemblies, one using the primary plasma jet obtained from a conventional DBD and the other using…
In this work we present some results of the treatment of polydimethylsiloxane (PDMS) surfaces using pulsed dielectric barrier discharge plasmas. The results of plasma treatment using different gases and mixtures, argon, argon plus water…
The Dielectric Barrier Discharge (DBD) micro-plasma actuator stands out as a highly promising tool for active fluid flow control. Researchers specializing in flow control have taken a keen interest in this actuator due to its economical…
Packed bed plasma reactors (PBPRs) inherently have complex geometries where the volume between the electrodes is filled with dielectric/catalytic pellets to form an array of voids and cavities. This design generates multiple length scales…
Applications of dielectric barrier discharge (DBD) based atmospheric pressure plasma jets are often limited by the relatively small area of treatment due to their 1D configuration. This letter describes the first results demonstrating…
Following up a recent study describing a flexible plasma source operated in planar geometry, the performance of a cold atmospheric plasma jet (CAPJ) matrix emanating radially from a soft cylindrical surface in the open air is presented. The…
We present a novel microplasma flow reactor using a dielectric barrier discharge (DBD) driven by repetitively nanosecond high-voltage pulses. Our DBD-based geometry can generate a non-thermal plasma discharge at atmospheric pressure and…
Based on the consideration of increasing the number of initial electrons and providing an appropriate distribution of electric field strength for discharge space, a method of adopting the wire-cylindrical type electrode structure with a…
There is an urgent need for disinfection and sterilization devices accessible to the public that can be fulfilled by innovative strategies for using cold atmospheric pressure plasmas. Here we explore and evaluate an approach combining a…
A new category of plasma emerged at the end of the 1970s. It consists of a column of plasma maintained by the electric field component of radiofrequency (RF) and microwave (MW) waves that propagate at the interface between the outer surface…