相关论文: Validation of a model for estimating the strength …
To produce a vortex, a torque must be applied to the fluid. In viscous fluids, the torques that produce turbulent vortices result from the loss of symmetry of the stress tensor, once the viscous friction exceeds the shear stress resistance…
This work is concerned with the numerical investigation of the dynamics of stopping vortex formation in the uniform flow past a wedge mounted on a wall for channel Reynolds number $Re_c=1560$. The streamfunction-vorticity ($\psi$-$\omega$)…
Turbofan engine performance depends highly on the characteristics and conditions of the inlet flow. Swirl distortions, caused by non-uniformities in flows arising from boundary layer or ground/fuselage vortex ingestion are of concern and…
Patterns of vorticity in the wake of a single rectangular winglet (vortex generator) embedded in a turbulent boundary layer have been studied using Stereoscopic Particle Image Velocimetry (SPIV). The winglet was mounted normally to a flat…
A quantitative understanding of the dominant mechanisms that govern the generation and decay of the counter-rotating vortex pair (CVP) produced by yawed wind turbines is needed to fully realize the potential of yawing for wind farm power…
The present work examines the downstream vortex evolution behind a cascade of vortex generators producing counter-rotating vortices in a boundary layer of negligible streamwise pressure gradient. For the current study, which is an extension…
This study reports on the vortex-induced lift production mechanisms in low Reynolds number flows over low aspect-ratio rectangular wings. We use a rigorous force partitioning method which allows for the estimation of the pressure-induced…
The paper presents a numerical investigation of the leading-edge vortices generated by rotating triangular wings at Reynolds number $Re=250$. A series of three-dimensional numerical simulations have been carried out using a Fourier…
This study introduces a vortex gust generation method for isolated vortices impacting a downstream airfoil that is applicable to both numerical simulations and experiments. The vortex gust is generated by a symmetric airfoil undergoing a…
The turbulent flow past a wall-mounted square cylinder with an aspect ratio of four was investigated with the aid of Spalart-Allmaras improved delayed detached-eddy simulation (S-A IDDES) and proper orthogonal decomposition (POD). The…
Embedded vortices in turbulent wall-bounded flow over a flat plate, generated by a passive rectangular vane-type vortex generator with variable angle $\beta$ to the incoming flow in a low-Reynolds number flow ($Re=2600$ based on the inlet…
Vortex rings have the ability to transport fluid over long distances. They are usually produced by ejecting a volume of fluid through a circular orifice or nozzle. When the volume and velocity of the ejected fluid are known, the vortex'…
Spatially developing round jet flows are fundamental to numerous engineering applications. This letter applies the wave-particle turbulence simulation (WPTS) method, a recently developed multiscale approach, to simulate a spatially…
We propose to combine the active vortex generators with the particle image velocimetry (PIV) measurements and post-processing streamwise vortex characterization algorithms into a feedback based closed-loop control system for wind turbine…
Motivated by the need for compact descriptions of the evolution of non-classical wakes behind yawed wind turbines, we develop an analytical model to predict the shape of curled wakes. Interest in such modelling arises due to the potential…
Boundary layer transition triggered by a discrete roughness element generates a turbulent wedge that spreads laterally as it proceeds downstream. Historical literature reports the spreading half angle is approximately 6$^{\circ}$ in…
A large scale parametric study of the flow over the prolate spheroid is presented to understand the effect of Reynolds number and angle of attack on the separation, the wake formation and the loads. Large-Eddy Simulation is performed for…
This study is concerned with the simulation of a complex fluid flow problem involving flow past a wedge mounted on a wall for channel Reynolds numbers $Re_c=1560$, $6621$ and $6873$ in uniform and accelerated flow medium. The transient…
Drag for wall-bounded flows is directly related to flux of spanwise vorticity outward from the wall. In turbulent flows a key contribution arises from cross-stream "vorticity cascade" by nonlinear advection and stretching of vorticity. We…
The variance and spectra of wall-normal velocities are investigated for direct numerical simulations of turbulent flow in a channel, pipe, and zero-pressure-gradient boundary layer across a decade of friction Reynolds numbers. Spectra along…