相关论文: Amorphous Intergranular Films Enable the Creation …
Nanocrystalline metals are promising radiation tolerant materials due to their large interfacial volume fraction, but irradiation-induced grain growth can eventually degrade any improvement in radiation tolerance. Therefore, methods to…
Nanocrystalline Cu-3 at.% Zr powders with ~20 nm average grain size were created with mechanical alloying and their thermal stability was studied from 550-950 {\deg}C. Annealing drove Zr segregation to the grain boundaries, which led to the…
Amorphous complexions have recently been demonstrated to simultaneously enhance the ductility and stability of certain nanocrystalline alloys. In this study, three quinary alloys (Cu-Zr-Hf-Mo-Nb, Cu-Zr-Hf-Nb-Ti, and Cu-Zr-Hf-Mo-W) are…
Building on the recent discovery of tough nanocrystalline Cu-Zr alloys with amorphous intergranular films, this paper investigates ternary nanocrystalline Cu-Zr-Hf alloys with a focus on understanding how alloy composition affects the…
Nanocrystalline metals typically have high fatigue strengths, but low resistance to crack propagation. Amorphous intergranular films are disordered grain boundary complexions that have been shown to delay crack nucleation and slow crack…
Grain size engineering, particularly reducing grain size into the nanocrystalline regime, offers a promising pathway to further improve the strength-to-weight ratio of Al alloys. Unfortunately, the fabrication of nanocrystalline metals…
Amorphous grain boundary complexions have been shown to increase the plasticity of nanocrystalline alloys as compared to ordered grain boundaries. Here, the effect of an important structural descriptor, amorphous complexion thickness, on…
Solute segregation is used to limit grain growth in nanocrystalline metals, but this stabilization often breaks down at high temperatures. Amorphous intergranular films can form in certain alloys at sufficiently high temperatures, providing…
Grain boundary-based mechanisms are known to control the plastic deformation and failure of nanocrystalline metals, with manipulation of the boundary structure a promising path for tuning this response. In this study, the role of…
Amorphous complexions in nanocrystalline metals have the potential to improve mechanical properties and radiation tolerance, as well as resistance to grain growth. In this study, the stability of amorphous complexions in binary and ternary…
Atomistic simulations are used to study segregation-induced intergranular film formation in Cu-Zr and Cu-Nb alloys. While Cu-Zr forms structurally disordered or amorphous films, ordered films comprised of a second phase usually precipitate…
Stabilization of grain structure is important for nanocrystalline alloys, and grain boundary segregation is a common approach to restrict coarsening. Doping can alter grain boundary structure, with high temperature states such as amorphous…
Although nanocrystalline alloys regularly exhibit high strengths, their use in structural applications often face challenges due to sample size limitations, unstable microstructures, and the limited ability to plastically deform. The…
Complexions are phase-like interfacial features that can influence a wide variety of properties, but the ability to predict which material systems can sustain these features remains limited. Amorphous complexions are of particular interest…
Amorphous grain-boundary (GB) complexions in thermally stable nanocrystalline alloys are commonly assumed to be structurally homogeneous, yet their disordered nature makes them susceptible to local short-range ordering (SRO). The influence…
Interfacial segregation can stabilize grain structures and even lead to grain boundary complexion transitions. However, understanding of the complexity of such phenomena in polycrystalline materials is limited, as most studies focus on…
Nanocrystalline metals and ceramics with <100 nm grain sizes and superior properties (e.g., mechanical strength, hardness, fracture toughness and stored dielectric energy) are of great interest. Much has been discussed about achieving nano…
Grain boundary complexions have been observed to affect the mechanical behavior of nanocrystalline metals, improving both strength and ductility. While an explanation for the improved ductility exists, the observed effect on strength…
Monophasic and homogeneous Ni10Zr7 nanocrystalline alloy films were successfully grown at room temperature by co-sputtering in an indigenously developed three-gun DC/RF magnetron sputtering unit. The films could be produced with long-range…
The intermetallic compound Zr3Al is severely deformed by the method of repeated cold rolling. By X-ray diffraction it is shown that this leads to amorphization. TEM investigations reveal that a homogeneously distributed debris of very small…