相关论文: Silver Nanowires on Carbon Nanotube Aerogel Sheets…
In this work, we report on the fabrication of continuous transparent and flexible supercapacitors by depositing a CNT network onto a polymer electrolyte membrane directly from an aerogel of ultra-long CNTs produced floating in the gas…
Transparent and conductive films (TCFs) are of great technological importance. The high transmittance, electrical conductivity and mechanical strength make single-walled carbon nanotubes (SWCNTs) a good candidate for their raw material.…
Fabrication of silver nanowires (AgNWs) with fine and independent control of both the diameter (from 30 to 120 nm) and length (from 5 to 120 $\mu$m) by concomitant addition of co-nucleants and temperature control is demonstrated, and used…
As transparent electrodes, patterned silver nanowire (AgNW) networks suffer from noticeable pattern visibility, which is an unsettled issue for practical applications such as display. Here, we introduce a Gibbs-Thomson effect (GTE)-based…
We present a transparent conducting electrode composed of a periodic two-dimensional network of silver nanowires. Networks of Ag nanowires are made with wire diameters of 45-110 nm and pitch of 500, 700 and 1000 nm. Anomalous optical…
Large area graphene sheets grown by chemical vapor deposition can potentially be employed as a transparent electrode in photovoltaics if their sheet resistance can be significantly lowered, without any loss in transparency. Here, we report…
Single-walled carbon nanotube (SWCNT) films are promising materials for transparent conductive films (TCFs) with potential applications in flexible displays, touch screens, solar cells and solid-state lighting1,2. However, further…
Flexible transparent electrodes, encompassing the combination of optical transparency and electrical conductivity, empower numerous optoelectronic applications. While the main efforts nowadays concentrate on developing wire meshes and…
The propagation of azimuthally symmetric guided waves in multiwalled carbon nanotubes (MWCNTs) was analyzed theoretically in the mid-infrared and the visible regimes. The MWCNTs were modeled as ensembles of concentric, cylindrical,…
Transfer printing methods are used to pattern and assemble monolithic carbon nanotube (CNT) thin-film transistors on large-area transparent, flexible substrates. Airbrushed CNT thin-films with sheet resistance 1kOhmsquare^{-1} at 80%…
Printed electronics rely on the deposition of conductive liquid inks, typically onto polymeric or paper substrates. Among available conductive fillers for use in electronic inks, carbon nanotubes (CNTs) have high conductivity, low density,…
Single-walled carbon nanotubes (SWCNT) can be assembled into various macroscopic architectures, most notably continuous fibers and films, produced currently on a kilometer per day scale by floating catalyst chemical vapor depositionand…
Heat dissipation issues are the emerging challenges in the field of flexible electronics. Thermal management of flexible electronics creates a demand for flexible materials with highly anisotropic thermal conductivity, which work as heat…
Molecular level components, like carbon multiwalled nanotubes (MWNT), show great potential for future nanoelectronics. At low frequencies, only the outermost carbon layer determines the transport properties of the MWNT. Due to the…
We demonstrate assembly of solution processed semiconducting enriched (99%) single walled carbon nanotubes (s-SWNT) in an array with varying linear density via ac-dielectrophoresis and investigate detailed electronic transport properties of…
The discovery of transparent electrodes led to the development of optoelectronic devices such as OLEDs, LCDs, touchscreens, IR sensors, etc. Since ITO has many drawbacks in respect of its production cost and limited transparency in IR,…
Metallic nanowires (NW) coated with a high permittivity dielectric are proposed as means to strongly reduce the light scattering of the conducting NW, rendering them transparent at infrared wavelengths of interest in telecommunications.…
Transparent electrodes (TEs) made of metallic nanowires, such as Ag, Au, Cu, and Ni, have attracted rising attention for several reasons: 1) they can act as a substitute for tin oxide-based TEs such as indium-tin oxide (ITO) and…
The charge transport properties of single superconducting tin nanowires, encapsulated by multiwalled carbon nanotubes have been investigated by multi-probe measurements. The multiwalled carbon nanotube protects the tin nanowire from…
Single walled carbon nanotubes (SWNT) have displayed a wealth of quantum transport phenomena thus far. Defect free, unperturbed SWNTs with wellbehaved or tunable metal contacts are important to probing the intrinsic electrical properties of…