相关论文: Reverse Engineering the Raspberry Pi Camera V2: A …

The Raspberry Pi camera module is widely used in open source hardware projects as a low cost camera sensor. However, when the stock lens is removed and replaced with other custom optics the sensor will return a non-uniform background and…

Single-pixel imaging (SPI) has attracted widespread attention because it generally uses a non-pixelated photodetector and a digital micromirror device (DMD) to acquire the object image. Since the modulated patterns seen from two reflection…

High resolution image sensors require electrical access to each individual pixel for signal readout. Such access is especially challenging for ultra-miniaturized pixels, for heterogeneously integrated sensing and readout layers in…

The Gemini Planet Imager (GPI) is a high contrast imaging instrument that aims to detect and characterize extrasolar planets. GPI is being upgraded to GPI 2.0, with several subsystems receiving a re-design to improve its contrast. To enable…

Photoplethysmography is a prevalent, non-invasive heart monitoring method. In this paper an implementation of photoplethysmography on the Raspberry Pi is presented. Two modulation techniques are discussed, which make possible to measure…

As conventional frame-based cameras suffer from high energy consumption and latency, several new types of image sensors have been devised, with some of them exploiting the sparsity of natural images in some transform domains. Instead of…

Single-pixel imaging (SPI) exhibits cost-effectiveness, broad spectrum, and stable sub-Nyquist sampling reconstruction, enabling applications across diverse imaging fields.However, due to the inherent reconstruction mechanism, SPI is not…

This study reports the development and characterization of an efficient portable X-ray imaging device built from Raspberry Pi components, including a high-quality 12.3-megapixel camera configured for indirect detection with a Gd2O2S:Tb…

A scanning pixel camera is a novel low-cost, low-power sensor that is not diffraction limited. It produces data as a sequence of samples extracted from various parts of the scene during the course of a scan. It can provide very detailed…

Blind methods often separate or identify signals or signal subspaces up to an unknown scaling factor. Sometimes it is necessary to cope with the scaling ambiguity, which can be done through reconstructing signals as they are received by…

Lensless imaging seeks to replace/remove the lens in a conventional imaging system. The earliest cameras were in fact lensless, relying on long exposure times to form images on the other end of a small aperture in a darkened room/container…

Some applications in scientific imaging, like space-based high-precision photometry, benefit from a detailed characterization of the sensitivity variation within a pixel. A detailed map of the intra-pixel sensitivity (IPS) allows to…

Wide-field survey instruments are used to efficiently observe large regions of the sky. To achieve the necessary field of view, and to provide a higher signal-to-noise ratio for faint sources, many modern instruments are undersampled.…

Single-pixel imaging (SPI) is a novel technique capturing 2D images using a photodiode, instead of conventional 2D array sensors. SPI owns high signal-to-noise ratio, wide spectrum range, low cost, and robustness to light scattering.…

The speed and quality of single-pixel imaging (SPI) are fundamentally limited by image modulation frequency and by the levels of optical noise and compression noise. In an approach to come close to these limits, we introduce a SPI…

Cameras capture sensor RAW images and transform them into pleasant RGB images, suitable for the human eyes, using their integrated Image Signal Processor (ISP). Numerous low-level vision tasks operate in the RAW domain (e.g. image…

Single Pixel Imaging is an emerging imaging technique that employs a bucket detector (photodiode) to sample a spatially modulated light field, rather than measuring the spatial distribution with an array of detectors. This approach provides…

We present a technique called single-pixel imaging camera based on complementary detection and optimized Bernoulli modulation (CSPI camera), which can significantly reduce the influence of the disturbance light to single-pixel imaging…

Ensuring end-to-end security in image sensors has become essential as visual data can be exposed through multiple stages of the imaging pipeline. Advanced protection requires encryption to occur before pixel values appear on any readout…

In this paper, we propose a technique named reflection F-scan or RF-scan, that can be used to measure the nonlinear-refractive index n_2 of thin-film semiconductors. In this technique, a p-polarized Gaussian beam is focused using an…