相关论文: Effect of copper content on thermal and mechanical…
The influence of a modifier based on multi walled carbon nanotubes (MWCNT) is investigated using C11000 copper alloy. The influence of the modifier addition into the melt was investigated using tensile test, hardness measurements, X-ray…
Zinc alloys are recognised for their excellent biocompatibility and favourable corrosion rates, making them suitable for bioabsorbable implants. However, their mechanical properties necessitate improvement to fulfil the rigorous…
Electrochemical water electrolysis, which produces clean energy carriers to mitigate carbon emissions, lacks suitable, low-cost electrodes for efficient oxygen evolution reaction (OER) in alkaline water splitting. To address this challenge,…
The softening and strengthening contributions in pre-deformed and aged Al-Mg-Cu alloys containing 3wt.%Mg and 0.5wt.%Cu are evaluated by a combination of microscopy, mechanical testing and modelling. A refined phenomenological model for the…
A novel y-y'-y" dual-superlattice superalloy, with promising mechanical properties up to elevated temperatures was recently reported. The present work employs state of the art chemical and spatial characterization techniques to study the…
Our experiments demonstrate that alloying the cubic-phase YbN into the wurtzite-phase AlN results in clear mechanical softening and enhanced electromechanical coupling of AlN. First-principle calculations reproduce experimental results…
The results of investigations of the corrosion resistance of Al-Mg-Sc-Zr alloys with varying Mg content and different Sc/Zr ratios are presented. The objects of investigations were the Al-Mg-Sc-Zr alloys with total Sc + Zr content of 0.32…
Recent advances in microelectromechanical systems often require multifunctional materials, which are designed so as to optimize more than one property. Using density functional theory calculations for alloyed nitride systems, we illustrate…
The effect of Si on Fe-rich intermetallics formation and mechanical properties of heat-treated squeeze cast Al-5.0Cu-0.6Mn-0.7Fe alloy was investigated. Our results show that increasing Si content promotes the formation of…
Zinc alloys have emerged as promising candidates for biodegradable materials due to their remarkable biocompatibility and favorable mechanical characteristics. The incorporation of alloying elements plays an essential role in advancing the…
We report here the structural, electrical and magnetic properties of as-cast V$_{1-x}$Zr$_x$ alloys ($x$ =0 - 0.4) at low temperatures. We observe that all the alloys undergo successive peritectic and eutectic reactions during cooling from…
The influence of Sn alloying additions on the aqueous passivation behavior of Cu-Al alloys was revisited and found to function as a new third element effect in acidified 0.1 M Na2SO4 solution. The role of each element during the process of…
Zn-Al-Mg coatings are characterized by a complex microstructure with dendritic and eutectic phases. This heterogeneous phase distribution contributes to multiple deformation and damage mechanisms. The presence of brittle phases promotes…
Aluminum and their alloys, after careful treatments, can develop excellent mechanical, tribological, electrical and chemical (high corrosion resistance) properties. However, 7000 series, with Cu in the alloy, have a poor corrosion…
The mechanical performance and microstructures of a CoCrNi medium-entropy alloy (MEA) and NCoCrNi, alloyed with 0.5at% N, after high pressure torsion (HPT) and subsequent annealing treatments in a temperature range of 150-1000 {\deg}C were…
Sn-Ag-Cu (SAC) alloys are commonly recognized as lead-free solders employed in the electronics industry. However, some disadvantages in mechanical properties and their higher melting temperatures compared to Pb-Sn solders prompt new…
The Kondo effect is a many-body phenomenon allowing insight into the electronic and atomistic structure of spin-polarized adsorbates on metal surfaces. Its chemical control is intriguing because it deepens such insight, but the underlying…
Spinel ferrite Cu1-xZnxFe2O4 nanofibers over a compositional range 0 < x < 1 were prepared by electrospinning combined with sol-gel method. The influence of Zn2+ ions substitution on morphology, structure, and magnetic properties of copper…
The influence of a modifier based on WC nanoparticles was investigated using bulk Al in a real industrial process using a commercial AlSi hypoeutectic alloy. The modifier was prepared by hot extrusion approach. Its influence was…
New approaches for the design of alloy systems with multiprincipal elements is recently researched in refractory materials field. However, most research aimed at arc melting process with weakness of coarsening of grains and inhomogeneous…