相关论文: Coating of Aluminum Alloys by Micro Arc Oxidation …
Plasma electrolytic oxidation (PEO) is a surface processing for oxide coatings formation with advanced properties. Mostly, PEO is performed in an aqueous solution electrolyte which limits the dimension of treated parts due to the system…
Plasma electrolytic oxidation (PEO) is a technique used to create oxide-ceramic coatings on lightweight metals, such as aluminium, magnesium, and titanium. PEO is known for producing coatings with high corrosion resistance and strong…
Plasma electrolytic oxidation (PEO) processing of EV 31 magnesium alloy has been carried out in fluoride containing electrolyte under bipolar pulse current regime. Unusual PEO cathodic micro-discharges have been observed and investigated.…
One of the most important methods of producing materials and oxide coating is plasma electrolytic oxidation (PEO). Coatings made on aluminum in PEO method have two allotropes of $\alpha$-Al$_2$O$_3$ and $\gamma$-Al$_2$O$_3$. Coatings…
The growth of thin oxide coatings on the aluminum substrate in water-based sodium tungstate electrolyte by plasma electrolytic oxidation (PEO) is discussed and experimentally illustrated. The growth is carried out using a distinctive…
Plasma electrolytic oxidation (PEO) was carried out to form black ceramic coatings on AZ31 magnesium alloy in aluminate-tungstate electrolyte. Influences of current frequency (such as 100, 1000 and 2000 Hz) on properties of the PEO coatings…
The localized dielectric breakdown had been considered as the driving force for growth of plasma electrolytic oxide (PEO) coatings for several decades. However, the TEM study here reveals the dielectric breakdown behavior has little…
Micro Arc Oxidation (MAO) is an electrochemical approach for the surface treatment usually applied on so called valve metals such as Al, Mg and Ti. MAO is usually carried out an aqueous electrolyte, which involves a bath cooling and leads…
In our work, a novel processing strategy for the continuous fabrication and surface modification of wires from Magnesium alloy WE43 by means of plasma-electrolytic oxidation (PEO) is presented. In the first step, wires with a strong basal…
The process of alumina coating on the steel surface plasma electrolytic method is a method for increasing the corrosion resistance, in this process, electrolytic aluminum containing compounds should be able to cover the surface. The results…
Recently the successful formation of PEO coatings on zinc in a phosphate aluminate electrolyte was shown. The produced composite coatings contain various mixtures of ZnO and ZnAl$_2$O$_4$. In frame of the current study, the properties of…
Anodic aluminum oxide (AAO) or anodic alumina template containing hexagonally ordered nanopores has been widely used over the last decade for the development of numerous functional nanostructures such as nanoscale sensors, computing…
Porous polymer films of Poly(ethylene oxide)(PEO) are synthesized by solution casting technique using gamma irradiated: (a) PEO powder (S-series) and (b) PEO - methanol solution (L-series). Pore phase forms instantaneously during…
Wear resistant coatings were produced on a permanent mould cast MRI 230D Mg alloy by (a) PEO in silicate based electrolyte, (b) PEO in phosphate based electrolyte, (c) hybrid coatings of silicate PEO followed by laser surface alloying (LSA)…
A thin coating of thorium on aluminium substrates with the areal density of 110 to 130 $\mu g/cm^2$ is developed over a circular area of 22 mm diameter by using the electrodeposition method. An electrodeposition system is fabricated to…
Extending plasmonics into the ultraviolet range imposes the use of aluminum to achieve the best optical performance. However, water corrosion is a major limiting issue for UV aluminum plasmonics, as this phenomenon occurs significantly…
The old creation method of this coating is using salt bath for an approximate time of 6 to 10 hours, which means wasting a lot of time and energy while the formation of this coating with the plasma electrolytic method just takes about 15…
Polymer additives [like polyethylene oxide (PEO)] are widely used for smooth electrode deposition in aqueous zinc and a number of other battery systems currently investigated for energy storage applications. However, the precise mechanism…
The corrosion, mechanical degradation and biological performance of cold-drawn WE43 Mg wires were analyzed as a function of thermo-mechanical processing and the presence of a protective oxide layer created by continuous plasma electrolytic…
Nanopores (NPs) grown by anodizing can be partially hidden beneath a relatively compact surface oxide layer, which limits the volumetric surface area of these nanostructures. In this work, nitinol (NiTi) alloy was anodized in an electrolyte…