相关论文: Eliminating stray radiation inside large area imag…

We have theoretically proposed a highly compact refractive-index sensor consisted of edge-cavity and line-defect waveguide in two-dimensional photonic crystal. The sensing object is completely outside of the single enclosed surface of the…

The Habitable Worlds Observatory (HWO), a nextgeneration ultraviolet/optical/infrared space telescope, will require detector technologies capable of supporting substantially larger pixel-count arrays than those flown on previous missions.…

Large-format (sub)millimeter wavelength imaging arrays are best operated in scanning observing modes rather than traditional position-switched (chopped) modes. The choice of observing mode is critical for isolating source signals from…

Microwave Kinetic Inductance Detectors (MKIDs) are beginning to become more prominent in astronomical instrumentation, due to their sensitivity, low noise, high pixel count for superconducting detectors, and inherent energy and time…

Millimeter-wave (MMW) imaging has a wide prospect in application of concealed weapons detection. We propose a circular-arc multiple-input multiple-output (MIMO) array scheme with uniformly spaced transmit and receive antennas along the…

Controlling stray light at millimeter wavelengths requires special optical design and selection of absorptive materials that should be compatible with cryogenic operating environments. While a wide selection of absorptive materials exists,…

We develop a simple coordinate transformation which can be employed to compensate for the nonlinearity introduced by a Microwave Kinetic Inductance Detector's (MKID) homodyne readout scheme. This coordinate system is compared to the…

The Compact Linear Collider (CLIC) targets a nanometre beam size at the collision point. Realising this beam size requires the generation and transport of ultra-low emittance beams. Dynamic imperfections can deflect the colliding beams,…

Protection of information against electromagnetic eavesdropping is an important issue. Information may be derivable from the shape of an unintended electromagnetic signal. The resulting electromagnetic emanations can be correlated with…

We report on the performance of lumped--elements Kinetic Inductance Detector (KID) arrays for mm and sub--mm wavelengths, operated at 0.3K during the stratospheric flight of the OLIMPO payload, at an altitude of 37.8 km. We find that the…

We present the design, fabrication, and optical characterization of ultra-compact mid-wave infrared photodetector pixels. Our design relies on a guided mode resonance structure to confine incident mid-infrared light to the 250 nm-thick…

The wavefront measurement of a light beam is a complex task, which often requires a series of spatially resolved intensity measurements. For instance, a detector array may be used to measure the local phase gradient in the transverse plane…

Millimeter wave (mmWave) communication is a promising technology for 5G cellular systems. To compensate for the severe path loss in mmWave systems, large antenna arrays are generally used to achieve significant beamforming gains. However,…

We present a wafer trimming technique for producing superconducting micro-resonator arrays with highly uniform frequency spacing. With the light-emitting diode (LED) mapper technique demonstrated previously, we first map the measured…

We present the development of a machine learning based pipeline to fully automate the calibration of the frequency comb used to read out optical/IR Microwave Kinetic Inductance Detector (MKID) arrays. This process involves determining the…

To obtain microscope images at multiple focal planes, the distance between the objective and sample can be mechanically adjusted. Images are acquired sequentially at each axial distance. Digital refocusing with a light-emitting diode (LED)…

We present DARKNESS (the DARK-speckle Near-infrared Energy-resolving Superconducting Spectrophotometer), the first of several planned integral field spectrographs to use optical/near-infrared Microwave Kinetic Inductance Detectors (MKIDs)…

Detector requirements for far infrared astronomy generally result in devices which exhibit a few-moded response to incident radiation. The sensitivity and spatial form of the individual modes to which such a detector is sensitive can be…

In this work, we present a highly efficient quantitative phase imaging (QPI) approach using programmable annular LED illumination based on traditional bright-field microscope. As a new type of coded illumination, the LED array provides a…

We report a high Responsivity broad band photo-detector working in the wavelength range 400 nm to 1100 nm in a horizontal array of Si microlines (line width ~1 micron) fabricated on a Silicon-on-Insulator (SOI) wafer. The array was made…